Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

Nope. I am not using WCCP or Cisco Routers, and have never looked at the
WCCPv2 patches.

Regards
Henrik

fre 2003-01-10 klockan 11.42 skrev hare ram:
> any coments on this problem
>
> thanks
> hare
> ----- Original Message -----
> From: "hare ram" <hareram@sol.net.in>
> To: <squid-users@squid-cache.org>
> Sent: Friday, January 10, 2003 2:03 PM
> Subject: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router
>
>
> > Hi all
> >
> > i am trying to deploy squid 2.5 version + WCCP v2 + cisco Router
> >
> > but i could not able to success
> >
> > my proxy running with transparent, tested working fine
> > but when i divert the traffic from cisco router using wccp, i could not =
> > able to see any traffic going via my cache server
> >
> > but iam able to see lot of redirect packets from cisco
> >
> > any suggestion will be appriciated
> >
> > ###########my setup
> >
> > Redhat 8.0 with 2.4.18-19.8 kernal
> > patched kernal with iptables 1.2.7 with Visolve WCCP v2 Patch to kernal
> > patched latest squid ver 2.5 also with the recomended patch give from =
> > this URL
> > http://squid.visolve.com/developments/wccpv2_install.htm
> >
> > ###########My cisco config Looks Like this
> >
> > !
> > ip subnet-zero
> > no ip source-route
> > ip wccp web-cache
> > !
> > !
> > ip name-server z.z.z.z
> > !
> > no ip bootp server
> > call rsvp-sync
> > !
> > !
> > !
> > !
> > !
> > interface FastEthernet0/0
> > ip wccp webcache redirect out
> > ip address y.y.y.y y.y.y.y
> >
> >
> >
> > ###########GATEWAY#show ip wccp web-cache detail
> > WCCP Cache-Engine information:
> > IP Address: x.x.x.x ( ip address of cache Server)
> > Protocol Version: 2.0
> > State: Usable
> > Initial Hash Info: 00000000000000000000000000000000
> > 00000000000000000000000000000000
> > Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > =
> > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > Hash Allotment: 256 (100.00%)
> > Packets Redirected: 1048
> > Connect Time: 00:24:23
> >
> >
> >
> >
> > ########My squid.conf looks like this
> >
> >
> > #######WCCP config with Squid
> >
> > wccp_router y.y.y.y
> > wccp2_router y.y.y.y
> >
> >
> > ###########My cache.log Looks Like this
> >
> >
> > 2003/01/10 19:36:23| Accepting HTTP connections at 0.0.0.0, port 3129, =
> > FD 11.
> > 2003/01/10 19:36:23| Accepting ICP messages at 0.0.0.0, port 3130, FD =
> > 12.
> > 2003/01/10 19:36:23| Accepting SNMP messages on port 3401, FD 13.
> > 2003/01/10 19:36:23| Accepting WCCP messages on port 2048, FD 14.
> > 2003/01/10 19:36:23| Accepting WCCP v2 messages on port 2048, FD 15.
> > 2003/01/10 19:32:10| Incoming WCCP2_I_SEE_YOU received id =3D 868.
> > 2003/01/10 19:32:10| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
> > tmp=3D17.
> > 2003/01/10 19:32:20| Incoming WCCP v2 I_SEE_YOU length 132.
> > 2003/01/10 19:32:20| Incoming WCCP2_I_SEE_YOU received id =3D 869.
> > 2003/01/10 19:32:20| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
> > tmp=3D17.
> > 2003/01/10 19:32:31| Incoming WCCP v2 I_SEE_YOU length 132.
> > 2003/01/10 19:32:31| Incoming WCCP2_I_SEE_YOU received id =3D 870.
> > 2003/01/10 19:32:31| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
> > tmp=3D17.
> > 2003/01/10 19:32:41| Incoming WCCP v2 I_SEE_YOU length 132.
> > 2003/01/10 19:32:41| Incoming WCCP2_I_SEE_YOU received id =3D 871.
> > 2003/01/10 19:32:41| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
> > tmp=3D17.
> > 2003/01/10 19:32:51| Incoming WCCP v2 I_SEE_YOU length 132.
> >
> >
> > my Cisco Debug Log Looks Like this
> > 2w1d: WCCP-PKT:S00: Received valid Here_I_Am packet from x.x.x.x =
> > w/rcv_id 00000380
> > 2w1d: WCCP-PKT:S00: Sending I_See_You packet to x.x.x.x w/ rcv_id =
> > 00000381
> > 2w1d: WCCP-PKT:S00: Received valid Here_I_Am packet from x.x.x.x =
> > w/rcv_id 00000381
> > 2w1d: WCCP-PKT:S00: Sending I_See_You packet to x.x.x.x w/ rcv_id =
> > 00000382
> >
> >
> >
> >
Received on Fri Jan 10 2003 - 10:04:48 MST