Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

any coments on this problem

thanks
hare
----- Original Message -----
From: "hare ram" <hareram@sol.net.in>
To: <squid-users@squid-cache.org>
Sent: Friday, January 10, 2003 2:03 PM
Subject: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

> Hi all
>
> i am trying to deploy squid 2.5 version + WCCP v2 + cisco Router
>
> but i could not able to success
>
> my proxy running with transparent, tested working fine
> but when i divert the traffic from cisco router using wccp, i could not =
> able to see any traffic going via my cache server
>
> but iam able to see lot of redirect packets from cisco
>
> any suggestion will be appriciated
>
> ###########my setup
>
> Redhat 8.0 with 2.4.18-19.8 kernal
> patched kernal with iptables 1.2.7 with Visolve WCCP v2 Patch to kernal
> patched latest squid ver 2.5 also with the recomended patch give from =
> this URL
> http://squid.visolve.com/developments/wccpv2_install.htm
>
> ###########My cisco config Looks Like this
>
> !
> ip subnet-zero
> no ip source-route
> ip wccp web-cache
> !
> !
> ip name-server z.z.z.z
> !
> no ip bootp server
> call rsvp-sync
> !
> !
> !
> !
> !
> interface FastEthernet0/0
> ip wccp webcache redirect out
> ip address y.y.y.y y.y.y.y
>
>
>
> ###########GATEWAY#show ip wccp web-cache detail
> WCCP Cache-Engine information:
> IP Address: x.x.x.x ( ip address of cache Server)
> Protocol Version: 2.0
> State: Usable
> Initial Hash Info: 00000000000000000000000000000000
> 00000000000000000000000000000000
> Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> =
> FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> Hash Allotment: 256 (100.00%)
> Packets Redirected: 1048
> Connect Time: 00:24:23
>
>
>
>
> ########My squid.conf looks like this
>
>
> #######WCCP config with Squid
>
> wccp_router y.y.y.y
> wccp2_router y.y.y.y
>
>
> ###########My cache.log Looks Like this
>
>
> 2003/01/10 19:36:23| Accepting HTTP connections at 0.0.0.0, port 3129, =
> FD 11.
> 2003/01/10 19:36:23| Accepting ICP messages at 0.0.0.0, port 3130, FD =
> 12.
> 2003/01/10 19:36:23| Accepting SNMP messages on port 3401, FD 13.
> 2003/01/10 19:36:23| Accepting WCCP messages on port 2048, FD 14.
> 2003/01/10 19:36:23| Accepting WCCP v2 messages on port 2048, FD 15.
> 2003/01/10 19:32:10| Incoming WCCP2_I_SEE_YOU received id =3D 868.
> 2003/01/10 19:32:10| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
> tmp=3D17.
> 2003/01/10 19:32:20| Incoming WCCP v2 I_SEE_YOU length 132.
> 2003/01/10 19:32:20| Incoming WCCP2_I_SEE_YOU received id =3D 869.
> 2003/01/10 19:32:20| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
> tmp=3D17.
> 2003/01/10 19:32:31| Incoming WCCP v2 I_SEE_YOU length 132.
> 2003/01/10 19:32:31| Incoming WCCP2_I_SEE_YOU received id =3D 870.
> 2003/01/10 19:32:31| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
> tmp=3D17.
> 2003/01/10 19:32:41| Incoming WCCP v2 I_SEE_YOU length 132.
> 2003/01/10 19:32:41| Incoming WCCP2_I_SEE_YOU received id =3D 871.
> 2003/01/10 19:32:41| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
> tmp=3D17.
> 2003/01/10 19:32:51| Incoming WCCP v2 I_SEE_YOU length 132.
>
>
> my Cisco Debug Log Looks Like this
> 2w1d: WCCP-PKT:S00: Received valid Here_I_Am packet from x.x.x.x =
> w/rcv_id 00000380
> 2w1d: WCCP-PKT:S00: Sending I_See_You packet to x.x.x.x w/ rcv_id =
> 00000381
> 2w1d: WCCP-PKT:S00: Received valid Here_I_Am packet from x.x.x.x =
> w/rcv_id 00000381
> 2w1d: WCCP-PKT:S00: Sending I_See_You packet to x.x.x.x w/ rcv_id =
> 00000382
>
>
>
>
Received on Fri Jan 10 2003 - 03:48:44 MST