[squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

From: hare ram <hareram@dont-contact.us>
Date: Fri, 10 Jan 2003 14:03:09 +0530

Hi all

i am trying to deploy squid 2.5 version + WCCP v2 + cisco Router

but i could not able to success

my proxy running with transparent, tested working fine
but when i divert the traffic from cisco router using wccp, i could not =
able to see any traffic going via my cache server

but iam able to see lot of redirect packets from cisco

any suggestion will be appriciated

###########my setup

Redhat 8.0 with 2.4.18-19.8 kernal
patched kernal with iptables 1.2.7 with Visolve WCCP v2 Patch to kernal
patched latest squid ver 2.5 also with the recomended patch give from =
this URL
http://squid.visolve.com/developments/wccpv2_install.htm

###########My cisco config Looks Like this

!
ip subnet-zero
no ip source-route
ip wccp web-cache
!
!
ip name-server z.z.z.z
!
no ip bootp server
call rsvp-sync
!
!
!
!
!
interface FastEthernet0/0
ip wccp webcache redirect out
ip address y.y.y.y y.y.y.y

###########GATEWAY#show ip wccp web-cache detail
WCCP Cache-Engine information:
        IP Address: x.x.x.x ( ip address of cache Server)
        Protocol Version: 2.0
        State: Usable
        Initial Hash Info: 00000000000000000000000000000000
                                     00000000000000000000000000000000
        Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
                                         =
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
        Hash Allotment: 256 (100.00%)
        Packets Redirected: 1048
        Connect Time: 00:24:23

########My squid.conf looks like this

#######WCCP config with Squid

wccp_router y.y.y.y
wccp2_router y.y.y.y

###########My cache.log Looks Like this

2003/01/10 19:36:23| Accepting HTTP connections at 0.0.0.0, port 3129, =
FD 11.
2003/01/10 19:36:23| Accepting ICP messages at 0.0.0.0, port 3130, FD =
12.
2003/01/10 19:36:23| Accepting SNMP messages on port 3401, FD 13.
2003/01/10 19:36:23| Accepting WCCP messages on port 2048, FD 14.
2003/01/10 19:36:23| Accepting WCCP v2 messages on port 2048, FD 15.
2003/01/10 19:32:10| Incoming WCCP2_I_SEE_YOU received id =3D 868.
2003/01/10 19:32:10| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
tmp=3D17.
2003/01/10 19:32:20| Incoming WCCP v2 I_SEE_YOU length 132.
2003/01/10 19:32:20| Incoming WCCP2_I_SEE_YOU received id =3D 869.
2003/01/10 19:32:20| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
tmp=3D17.
2003/01/10 19:32:31| Incoming WCCP v2 I_SEE_YOU length 132.
2003/01/10 19:32:31| Incoming WCCP2_I_SEE_YOU received id =3D 870.
2003/01/10 19:32:31| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
tmp=3D17.
2003/01/10 19:32:41| Incoming WCCP v2 I_SEE_YOU length 132.
2003/01/10 19:32:41| Incoming WCCP2_I_SEE_YOU received id =3D 871.
2003/01/10 19:32:41| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
tmp=3D17.
2003/01/10 19:32:51| Incoming WCCP v2 I_SEE_YOU length 132.

my Cisco Debug Log Looks Like this
2w1d: WCCP-PKT:S00: Received valid Here_I_Am packet from x.x.x.x =
w/rcv_id 00000380
2w1d: WCCP-PKT:S00: Sending I_See_You packet to x.x.x.x w/ rcv_id =
00000381
2w1d: WCCP-PKT:S00: Received valid Here_I_Am packet from x.x.x.x =
w/rcv_id 00000381
2w1d: WCCP-PKT:S00: Sending I_See_You packet to x.x.x.x w/ rcv_id =
00000382
Received on Fri Jan 10 2003 - 01:38:50 MST

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:12:36 MST