Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

hi

if its wccp why should we have to redirect it from router cause wccp
itself say that "i m here" and broadcast this message to network when
he got reply from router from network its shown in router by this
command "sh ip wccp web cache detail" we never do any thing for
redirection on router if wccp is running , and according to my
knowledge there are no configuration for squid on wccp2 but i works
fine on wccp1 and u can find this configuration on squid site.

Regards
Farrukh Mahmood

----- Original Message -----
From: MASOOD AHMAD <masoodnt10@yahoo.com>
Date: Friday, January 10, 2003 5:53 pm
Subject: Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

> your wccp seems to be working fine try to put redirect
> out on router external interface it can be serail
> instead fast ethernet 0/0 it will work...
>
> Best Regards,
> Masood Ahmad Shah
> System Administrator
> Fibre Net
>
> --- hare ram <hareram@sol.net.in> wrote:
> > any coments on this problem
> >
> > thanks
> > hare
> > ----- Original Message -----
> > From: "hare ram" <hareram@sol.net.in>
> > To: <squid-users@squid-cache.org>
> > Sent: Friday, January 10, 2003 2:03 PM
> > Subject: [squid-users] Problem with SQUID+ WCCP v2 +
> > Cisco Router
> >
> >
> > > Hi all
> > >
> > > i am trying to deploy squid 2.5 version + WCCP v2
> > + cisco Router
> > >
> > > but i could not able to success
> > >
> > > my proxy running with transparent, tested working
> > fine
> > > but when i divert the traffic from cisco router
> > using wccp, i could not =
> > > able to see any traffic going via my cache server
> > >
> > > but iam able to see lot of redirect packets from
> > cisco
> > >
> > > any suggestion will be appriciated
> > >
> > > ###########my setup
> > >
> > > Redhat 8.0 with 2.4.18-19.8 kernal
> > > patched kernal with iptables 1.2.7 with Visolve
> > WCCP v2 Patch to kernal
> > > patched latest squid ver 2.5 also with the
> > recomended patch give from =
> > > this URL
> > >
> >
> http://squid.visolve.com/developments/wccpv2_install.htm
> > >
> > > ###########My cisco config Looks Like this
> > >
> > > !
> > > ip subnet-zero
> > > no ip source-route
> > > ip wccp web-cache
> > > !
> > > !
> > > ip name-server z.z.z.z
> > > !
> > > no ip bootp server
> > > call rsvp-sync
> > > !
> > > !
> > > !
> > > !
> > > !
> > > interface FastEthernet0/0
> > > ip wccp webcache redirect out
> > > ip address y.y.y.y y.y.y.y
> > >
> > >
> > >
> > > ###########GATEWAY#show ip wccp web-cache detail
> > > WCCP Cache-Engine information:
> > > IP Address: x.x.x.x ( ip
> > address of cache Server)
> > > Protocol Version: 2.0
> > > State: Usable
> > > Initial Hash Info:
> > 00000000000000000000000000000000
> > >
> > 00000000000000000000000000000000
> > > Assigned Hash Info:
> > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > > =
> > > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > > Hash Allotment: 256 (100.00%)
> > > Packets Redirected: 1048
> > > Connect Time: 00:24:23
> > >
> > >
> > >
> > >
> > > ########My squid.conf looks like this
> > >
> > >
> > > #######WCCP config with Squid
> > >
> > > wccp_router y.y.y.y
> > > wccp2_router y.y.y.y
> > >
> > >
> > > ###########My cache.log Looks Like this
> > >
> > >
> > > 2003/01/10 19:36:23| Accepting HTTP connections at
> > 0.0.0.0, port 3129, =
> > > FD 11.
> > > 2003/01/10 19:36:23| Accepting ICP messages at
> > 0.0.0.0, port 3130, FD =
> > > 12.
> > > 2003/01/10 19:36:23| Accepting SNMP messages on
> > port 3401, FD 13.
> > > 2003/01/10 19:36:23| Accepting WCCP messages on
> > port 2048, FD 14.
> > > 2003/01/10 19:36:23| Accepting WCCP v2 messages on
> > port 2048, FD 15.
> > > 2003/01/10 19:32:10| Incoming WCCP2_I_SEE_YOU
> > received id =3D 868.
> > > 2003/01/10 19:32:10| Incoming WCCP2_I_SEE_YOU
> > member change =3D 17 =
> > > tmp=3D17.
> > > 2003/01/10 19:32:20| Incoming WCCP v2 I_SEE_YOU
> > length 132.
> > > 2003/01/10 19:32:20| Incoming WCCP2_I_SEE_YOU
> > received id =3D 869.
> > > 2003/01/10 19:32:20| Incoming WCCP2_I_SEE_YOU
> > member change =3D 17 =
> > > tmp=3D17.
> > > 2003/01/10 19:32:31| Incoming WCCP v2 I_SEE_YOU
> > length 132.
> > > 2003/01/10 19:32:31| Incoming WCCP2_I_SEE_YOU
> > received id =3D 870.
> > > 2003/01/10 19:32:31| Incoming WCCP2_I_SEE_YOU
> > member change =3D 17 =
> > > tmp=3D17.
> > > 2003/01/10 19:32:41| Incoming WCCP v2 I_SEE_YOU
> > length 132.
> > > 2003/01/10 19:32:41| Incoming WCCP2_I_SEE_YOU
> > received id =3D 871.
> > > 2003/01/10 19:32:41| Incoming WCCP2_I_SEE_YOU
> > member change =3D 17 =
> > > tmp=3D17.
> > > 2003/01/10 19:32:51| Incoming WCCP v2 I_SEE_YOU
> > length 132.
> > >
> > >
> > > my Cisco Debug Log Looks Like this
> > > 2w1d: WCCP-PKT:S00: Received valid Here_I_Am
> > packet from x.x.x.x =
> > > w/rcv_id 00000380
> > > 2w1d: WCCP-PKT:S00: Sending I_See_You packet to
> > x.x.x.x w/ rcv_id =
> > > 00000381
> > > 2w1d: WCCP-PKT:S00: Received valid Here_I_Am
> > packet from x.x.x.x =
> > > w/rcv_id 00000381
> > > 2w1d: WCCP-PKT:S00: Sending I_See_You packet to
> > x.x.x.x w/ rcv_id =
> > > 00000382
> > >
> > >
> > >
> > >
> >
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
>
Received on Fri Jan 10 2003 - 06:33:51 MST