Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

Hi

sorry its not working even i tried that tooo also

any other help will appriciate

regards
hare
----- Original Message -----
From: "MASOOD AHMAD" <masoodnt10@yahoo.com>
To: "hare ram" <hareram@sol.net.in>
Cc: <squid-users@squid-cache.org>
Sent: Friday, January 10, 2003 6:23 PM
Subject: Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

> your wccp seems to be working fine try to put redirect
> out on router external interface it can be serail
> instead fast ethernet 0/0 it will work...
>
> Best Regards,
> Masood Ahmad Shah
> System Administrator
> Fibre Net
>
> --- hare ram <hareram@sol.net.in> wrote:
> > any coments on this problem
> >
> > thanks
> > hare
> > ----- Original Message -----
> > From: "hare ram" <hareram@sol.net.in>
> > To: <squid-users@squid-cache.org>
> > Sent: Friday, January 10, 2003 2:03 PM
> > Subject: [squid-users] Problem with SQUID+ WCCP v2 +
> > Cisco Router
> >
> >
> > > Hi all
> > >
> > > i am trying to deploy squid 2.5 version + WCCP v2
> > + cisco Router
> > >
> > > but i could not able to success
> > >
> > > my proxy running with transparent, tested working
> > fine
> > > but when i divert the traffic from cisco router
> > using wccp, i could not =
> > > able to see any traffic going via my cache server
> > >
> > > but iam able to see lot of redirect packets from
> > cisco
> > >
> > > any suggestion will be appriciated
> > >
> > > ###########my setup
> > >
> > > Redhat 8.0 with 2.4.18-19.8 kernal
> > > patched kernal with iptables 1.2.7 with Visolve
> > WCCP v2 Patch to kernal
> > > patched latest squid ver 2.5 also with the
> > recomended patch give from =
> > > this URL
> > >
> >
> http://squid.visolve.com/developments/wccpv2_install.htm
> > >
> > > ###########My cisco config Looks Like this
> > >
> > > !
> > > ip subnet-zero
> > > no ip source-route
> > > ip wccp web-cache
> > > !
> > > !
> > > ip name-server z.z.z.z
> > > !
> > > no ip bootp server
> > > call rsvp-sync
> > > !
> > > !
> > > !
> > > !
> > > !
> > > interface FastEthernet0/0
> > > ip wccp webcache redirect out
> > > ip address y.y.y.y y.y.y.y
> > >
> > >
> > >
> > > ###########GATEWAY#show ip wccp web-cache detail
> > > WCCP Cache-Engine information:
> > > IP Address: x.x.x.x ( ip
> > address of cache Server)
> > > Protocol Version: 2.0
> > > State: Usable
> > > Initial Hash Info:
> > 00000000000000000000000000000000
> > >
> > 00000000000000000000000000000000
> > > Assigned Hash Info:
> > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > > =
> > > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > > Hash Allotment: 256 (100.00%)
> > > Packets Redirected: 1048
> > > Connect Time: 00:24:23
> > >
> > >
> > >
> > >
> > > ########My squid.conf looks like this
> > >
> > >
> > > #######WCCP config with Squid
> > >
> > > wccp_router y.y.y.y
> > > wccp2_router y.y.y.y
> > >
> > >
> > > ###########My cache.log Looks Like this
> > >
> > >
> > > 2003/01/10 19:36:23| Accepting HTTP connections at
> > 0.0.0.0, port 3129, =
> > > FD 11.
> > > 2003/01/10 19:36:23| Accepting ICP messages at
> > 0.0.0.0, port 3130, FD =
> > > 12.
> > > 2003/01/10 19:36:23| Accepting SNMP messages on
> > port 3401, FD 13.
> > > 2003/01/10 19:36:23| Accepting WCCP messages on
> > port 2048, FD 14.
> > > 2003/01/10 19:36:23| Accepting WCCP v2 messages on
> > port 2048, FD 15.
> > > 2003/01/10 19:32:10| Incoming WCCP2_I_SEE_YOU
> > received id =3D 868.
> > > 2003/01/10 19:32:10| Incoming WCCP2_I_SEE_YOU
> > member change =3D 17 =
> > > tmp=3D17.
> > > 2003/01/10 19:32:20| Incoming WCCP v2 I_SEE_YOU
> > length 132.
> > > 2003/01/10 19:32:20| Incoming WCCP2_I_SEE_YOU
> > received id =3D 869.
> > > 2003/01/10 19:32:20| Incoming WCCP2_I_SEE_YOU
> > member change =3D 17 =
> > > tmp=3D17.
> > > 2003/01/10 19:32:31| Incoming WCCP v2 I_SEE_YOU
> > length 132.
> > > 2003/01/10 19:32:31| Incoming WCCP2_I_SEE_YOU
> > received id =3D 870.
> > > 2003/01/10 19:32:31| Incoming WCCP2_I_SEE_YOU
> > member change =3D 17 =
> > > tmp=3D17.
> > > 2003/01/10 19:32:41| Incoming WCCP v2 I_SEE_YOU
> > length 132.
> > > 2003/01/10 19:32:41| Incoming WCCP2_I_SEE_YOU
> > received id =3D 871.
> > > 2003/01/10 19:32:41| Incoming WCCP2_I_SEE_YOU
> > member change =3D 17 =
> > > tmp=3D17.
> > > 2003/01/10 19:32:51| Incoming WCCP v2 I_SEE_YOU
> > length 132.
> > >
> > >
> > > my Cisco Debug Log Looks Like this
> > > 2w1d: WCCP-PKT:S00: Received valid Here_I_Am
> > packet from x.x.x.x =
> > > w/rcv_id 00000380
> > > 2w1d: WCCP-PKT:S00: Sending I_See_You packet to
> > x.x.x.x w/ rcv_id =
> > > 00000381
> > > 2w1d: WCCP-PKT:S00: Received valid Here_I_Am
> > packet from x.x.x.x =
> > > w/rcv_id 00000381
> > > 2w1d: WCCP-PKT:S00: Sending I_See_You packet to
> > x.x.x.x w/ rcv_id =
> > > 00000382
> > >
> > >
> > >
> > >
> >
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
>
Received on Fri Jan 10 2003 - 06:00:54 MST