Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

Hi all

Does any one have experienced with wccp v2 with squid
and cisco routers

if yes, send me the proceedure, i would like to make this setup live and
test
but i could not able to get success

thanks for the help in advance

regards
hare
----- Original Message -----
From: "Henrik Nordstrom" <hno@squid-cache.org>
To: "hare ram" <hareram@sol.net.in>
Cc: <squid-users@squid-cache.org>
Sent: Friday, January 10, 2003 10:34 PM
Subject: Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

> Nope. I am not using WCCP or Cisco Routers, and have never looked at the
> WCCPv2 patches.
>
> Regards
> Henrik
>
> fre 2003-01-10 klockan 11.42 skrev hare ram:
> > any coments on this problem
> >
> > thanks
> > hare
> > ----- Original Message -----
> > From: "hare ram" <hareram@sol.net.in>
> > To: <squid-users@squid-cache.org>
> > Sent: Friday, January 10, 2003 2:03 PM
> > Subject: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router
> >
> >
> > > Hi all
> > >
> > > i am trying to deploy squid 2.5 version + WCCP v2 + cisco Router
> > >
> > > but i could not able to success
> > >
> > > my proxy running with transparent, tested working fine
> > > but when i divert the traffic from cisco router using wccp, i could
not =
> > > able to see any traffic going via my cache server
> > >
> > > but iam able to see lot of redirect packets from cisco
> > >
> > > any suggestion will be appriciated
> > >
> > > ###########my setup
> > >
> > > Redhat 8.0 with 2.4.18-19.8 kernal
> > > patched kernal with iptables 1.2.7 with Visolve WCCP v2 Patch to
kernal
> > > patched latest squid ver 2.5 also with the recomended patch give from
=
> > > this URL
> > > http://squid.visolve.com/developments/wccpv2_install.htm
> > >
> > > ###########My cisco config Looks Like this
> > >
> > > !
> > > ip subnet-zero
> > > no ip source-route
> > > ip wccp web-cache
> > > !
> > > !
> > > ip name-server z.z.z.z
> > > !
> > > no ip bootp server
> > > call rsvp-sync
> > > !
> > > !
> > > !
> > > !
> > > !
> > > interface FastEthernet0/0
> > > ip wccp webcache redirect out
> > > ip address y.y.y.y y.y.y.y
> > >
> > >
> > >
> > > ###########GATEWAY#show ip wccp web-cache detail
> > > WCCP Cache-Engine information:
> > > IP Address: x.x.x.x ( ip address of cache Server)
> > > Protocol Version: 2.0
> > > State: Usable
> > > Initial Hash Info: 00000000000000000000000000000000
> > > 00000000000000000000000000000000
> > > Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > > =
> > > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > > Hash Allotment: 256 (100.00%)
> > > Packets Redirected: 1048
> > > Connect Time: 00:24:23
> > >
> > >
> > >
> > >
> > > ########My squid.conf looks like this
> > >
> > >
> > > #######WCCP config with Squid
> > >
> > > wccp_router y.y.y.y
> > > wccp2_router y.y.y.y
> > >
> > >
> > > ###########My cache.log Looks Like this
> > >
> > >
> > > 2003/01/10 19:36:23| Accepting HTTP connections at 0.0.0.0, port 3129,
=
> > > FD 11.
> > > 2003/01/10 19:36:23| Accepting ICP messages at 0.0.0.0, port 3130, FD
=
> > > 12.
> > > 2003/01/10 19:36:23| Accepting SNMP messages on port 3401, FD 13.
> > > 2003/01/10 19:36:23| Accepting WCCP messages on port 2048, FD 14.
> > > 2003/01/10 19:36:23| Accepting WCCP v2 messages on port 2048, FD 15.
> > > 2003/01/10 19:32:10| Incoming WCCP2_I_SEE_YOU received id =3D 868.
> > > 2003/01/10 19:32:10| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
> > > tmp=3D17.
> > > 2003/01/10 19:32:20| Incoming WCCP v2 I_SEE_YOU length 132.
> > > 2003/01/10 19:32:20| Incoming WCCP2_I_SEE_YOU received id =3D 869.
> > > 2003/01/10 19:32:20| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
> > > tmp=3D17.
> > > 2003/01/10 19:32:31| Incoming WCCP v2 I_SEE_YOU length 132.
> > > 2003/01/10 19:32:31| Incoming WCCP2_I_SEE_YOU received id =3D 870.
> > > 2003/01/10 19:32:31| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
> > > tmp=3D17.
> > > 2003/01/10 19:32:41| Incoming WCCP v2 I_SEE_YOU length 132.
> > > 2003/01/10 19:32:41| Incoming WCCP2_I_SEE_YOU received id =3D 871.
> > > 2003/01/10 19:32:41| Incoming WCCP2_I_SEE_YOU member change =3D 17 =
> > > tmp=3D17.
> > > 2003/01/10 19:32:51| Incoming WCCP v2 I_SEE_YOU length 132.
> > >
> > >
> > > my Cisco Debug Log Looks Like this
> > > 2w1d: WCCP-PKT:S00: Received valid Here_I_Am packet from x.x.x.x =
> > > w/rcv_id 00000380
> > > 2w1d: WCCP-PKT:S00: Sending I_See_You packet to x.x.x.x w/ rcv_id =
> > > 00000381
> > > 2w1d: WCCP-PKT:S00: Received valid Here_I_Am packet from x.x.x.x =
> > > w/rcv_id 00000381
> > > 2w1d: WCCP-PKT:S00: Sending I_See_You packet to x.x.x.x w/ rcv_id =
> > > 00000382
> > >
> > >
> > >
> > >
>
>
>
Received on Fri Jan 10 2003 - 22:16:50 MST