Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

this is again magic is gateway directly Squid machine
then no need to run WCCP on router because then it
will create loop :) so I'm not able to understand for
what purpose these peoples running WCCP may be there
is another WCCP :):)

Best Regards,
Masood Ahmad Shah
System Administrator
Fibre Net
 
--- hare ram <hareram@sol.net.in> wrote:
> Hi
>
> Looks Like Some Magic running on your network
> there is not technology till now, with out
> redirection wccp will route the
> packets
>
> show you post your
> show run from cisco
>
> or you might have kept your gateway directly to
> SQUID box
>
> check again
>
> Regards
> hare
> ----- Original Message -----
> From: "Farrukh Mahmood"
> <farrukh_mahmood@eworld.net.pk>
> To: <squid-users@squid-cache.org>
> Cc: <masoodnt10@yahoo.com>
> Sent: Sunday, January 12, 2003 4:53 PM
> Subject: Re: [squid-users] Problem with SQUID+ WCCP
> v2 + Cisco Router
>
>
> > Dear Masood
> >
> >
> > i m running it with out any redirection with wccp
> v1 and its working
> > fine
> >
> >
> > Regards
> > Farrukh Mahmood
> > ----- Original Message -----
> > From: MASOOD AHMAD <masoodnt10@yahoo.com>
> > Date: Saturday, January 11, 2003 11:49 am
> > Subject: Re: [squid-users] Problem with SQUID+
> WCCP v2 + Cisco Router
> >
> > > Dear Farrukh,
> > >
> > > we will have put ip wccp redirection on router
> > > interface other wise it will not redirect port
> 80
> > > packet to caches........ try to study it on
> > >
> > >
>
http://www.cisco.com/warp/public/732/Tech/switching/wccp/index.shtml
> > >
> > > Best Regards,
> > > Masood Ahmad Shah
> > > System Administrator
> > > Fibre Net
> > >
> > > --- Farrukh Mahmood
> <farrukh_mahmood@eworld.net.pk>
> > > wrote:
> > > > hi
> > > >
> > > > if its wccp why should we have to redirect it
> from
> > > > router cause wccp
> > > > itself say that "i m here" and broadcast this
> > > > message to network when
> > > > he got reply from router from network its
> shown in
> > > > router by this
> > > > command "sh ip wccp web cache detail" we never
> do
> > > > any thing for
> > > > redirection on router if wccp is running , and
> > > > according to my
> > > > knowledge there are no configuration for squid
> on
> > > > wccp2 but i works
> > > > fine on wccp1 and u can find this
> configuration on
> > > > squid site.
> > > >
> > > >
> > > > Regards
> > > > Farrukh Mahmood
> > > >
> > > > ----- Original Message -----
> > > > From: MASOOD AHMAD <masoodnt10@yahoo.com>
> > > > Date: Friday, January 10, 2003 5:53 pm
> > > > Subject: Re: [squid-users] Problem with
> SQUID+ WCCP
> > > > v2 + Cisco Router
> > > >
> > > > > your wccp seems to be working fine try to
> put
> > > > redirect
> > > > > out on router external interface it can be
> serail
> > > > > instead fast ethernet 0/0 it will work...
> > > > >
> > > > > Best Regards,
> > > > > Masood Ahmad Shah
> > > > > System Administrator
> > > > > Fibre Net
> > > > >
> > > > > --- hare ram <hareram@sol.net.in> wrote:
> > > > > > any coments on this problem
> > > > > >
> > > > > > thanks
> > > > > > hare
> > > > > > ----- Original Message -----
> > > > > > From: "hare ram" <hareram@sol.net.in>
> > > > > > To: <squid-users@squid-cache.org>
> > > > > > Sent: Friday, January 10, 2003 2:03 PM
> > > > > > Subject: [squid-users] Problem with SQUID+
> WCCP
> > > > v2 +
> > > > > > Cisco Router
> > > > > >
> > > > > >
> > > > > > > Hi all
> > > > > > >
> > > > > > > i am trying to deploy squid 2.5 version
> +
> > > > WCCP v2
> > > > > > + cisco Router
> > > > > > >
> > > > > > > but i could not able to success
> > > > > > >
> > > > > > > my proxy running with transparent,
> tested
> > > > working
> > > > > > fine
> > > > > > > but when i divert the traffic from cisco
> > > > router
> > > > > > using wccp, i could not =
> > > > > > > able to see any traffic going via my
> cache
> > > > server
> > > > > > >
> > > > > > > but iam able to see lot of redirect
> packets
> > > > from
> > > > > > cisco
> > > > > > >
> > > > > > > any suggestion will be appriciated
> > > > > > >
> > > > > > > ###########my setup
> > > > > > >
> > > > > > > Redhat 8.0 with 2.4.18-19.8 kernal
> > > > > > > patched kernal with iptables 1.2.7 with
> > > > Visolve
> > > > > > WCCP v2 Patch to kernal
> > > > > > > patched latest squid ver 2.5 also with
> the
> > > > > > recomended patch give from =
> > > > > > > this URL
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
>
http://squid.visolve.com/developments/wccpv2_install.htm
> > > > > > >
> > > > > > > ###########My cisco config Looks Like
> this
> > > > > > >
> > > > > > > !
> > > > > > > ip subnet-zero
> > > > > > > no ip source-route
> > > > > > > ip wccp web-cache
> > > > > > > !
> > > > > > > !
> > > > > > > ip name-server z.z.z.z
> > > > > > > !
> > > > > > > no ip bootp server
> > > > > > > call rsvp-sync
> > > > > > > !
> > > > > > > !
> > > > > > > !
> > > > > > > !
> > > > > > > !
> > > > > > > interface FastEthernet0/0
> > > > > > > ip wccp webcache redirect out
> > > > > > > ip address y.y.y.y y.y.y.y
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > ###########GATEWAY#show ip wccp
> web-cache
> > > > detail
> > > > > > > WCCP Cache-Engine information:
> > > > > > > IP Address: x.x.x.x (
> ip
> > > > > > address of cache Server)
> > > > > > > Protocol Version: 2.0
> > > > > > > State: Usable
> > > > > > > Initial Hash Info:
> > > > > > 00000000000000000000000000000000
> > > > > > >
>
=== message truncated ===

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
Received on Mon Jan 13 2003 - 00:11:51 MST