Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

Hi

Looks Like Some Magic running on your network
there is not technology till now, with out redirection wccp will route the
packets

show you post your
show run from cisco

or you might have kept your gateway directly to SQUID box

check again

Regards
hare
----- Original Message -----
From: "Farrukh Mahmood" <farrukh_mahmood@eworld.net.pk>
To: <squid-users@squid-cache.org>
Cc: <masoodnt10@yahoo.com>
Sent: Sunday, January 12, 2003 4:53 PM
Subject: Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

> Dear Masood
>
>
> i m running it with out any redirection with wccp v1 and its working
> fine
>
>
> Regards
> Farrukh Mahmood
> ----- Original Message -----
> From: MASOOD AHMAD <masoodnt10@yahoo.com>
> Date: Saturday, January 11, 2003 11:49 am
> Subject: Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router
>
> > Dear Farrukh,
> >
> > we will have put ip wccp redirection on router
> > interface other wise it will not redirect port 80
> > packet to caches........ try to study it on
> >
> > http://www.cisco.com/warp/public/732/Tech/switching/wccp/index.shtml
> >
> > Best Regards,
> > Masood Ahmad Shah
> > System Administrator
> > Fibre Net
> >
> > --- Farrukh Mahmood <farrukh_mahmood@eworld.net.pk>
> > wrote:
> > > hi
> > >
> > > if its wccp why should we have to redirect it from
> > > router cause wccp
> > > itself say that "i m here" and broadcast this
> > > message to network when
> > > he got reply from router from network its shown in
> > > router by this
> > > command "sh ip wccp web cache detail" we never do
> > > any thing for
> > > redirection on router if wccp is running , and
> > > according to my
> > > knowledge there are no configuration for squid on
> > > wccp2 but i works
> > > fine on wccp1 and u can find this configuration on
> > > squid site.
> > >
> > >
> > > Regards
> > > Farrukh Mahmood
> > >
> > > ----- Original Message -----
> > > From: MASOOD AHMAD <masoodnt10@yahoo.com>
> > > Date: Friday, January 10, 2003 5:53 pm
> > > Subject: Re: [squid-users] Problem with SQUID+ WCCP
> > > v2 + Cisco Router
> > >
> > > > your wccp seems to be working fine try to put
> > > redirect
> > > > out on router external interface it can be serail
> > > > instead fast ethernet 0/0 it will work...
> > > >
> > > > Best Regards,
> > > > Masood Ahmad Shah
> > > > System Administrator
> > > > Fibre Net
> > > >
> > > > --- hare ram <hareram@sol.net.in> wrote:
> > > > > any coments on this problem
> > > > >
> > > > > thanks
> > > > > hare
> > > > > ----- Original Message -----
> > > > > From: "hare ram" <hareram@sol.net.in>
> > > > > To: <squid-users@squid-cache.org>
> > > > > Sent: Friday, January 10, 2003 2:03 PM
> > > > > Subject: [squid-users] Problem with SQUID+ WCCP
> > > v2 +
> > > > > Cisco Router
> > > > >
> > > > >
> > > > > > Hi all
> > > > > >
> > > > > > i am trying to deploy squid 2.5 version +
> > > WCCP v2
> > > > > + cisco Router
> > > > > >
> > > > > > but i could not able to success
> > > > > >
> > > > > > my proxy running with transparent, tested
> > > working
> > > > > fine
> > > > > > but when i divert the traffic from cisco
> > > router
> > > > > using wccp, i could not =
> > > > > > able to see any traffic going via my cache
> > > server
> > > > > >
> > > > > > but iam able to see lot of redirect packets
> > > from
> > > > > cisco
> > > > > >
> > > > > > any suggestion will be appriciated
> > > > > >
> > > > > > ###########my setup
> > > > > >
> > > > > > Redhat 8.0 with 2.4.18-19.8 kernal
> > > > > > patched kernal with iptables 1.2.7 with
> > > Visolve
> > > > > WCCP v2 Patch to kernal
> > > > > > patched latest squid ver 2.5 also with the
> > > > > recomended patch give from =
> > > > > > this URL
> > > > > >
> > > > >
> > > >
> > >
> > http://squid.visolve.com/developments/wccpv2_install.htm
> > > > > >
> > > > > > ###########My cisco config Looks Like this
> > > > > >
> > > > > > !
> > > > > > ip subnet-zero
> > > > > > no ip source-route
> > > > > > ip wccp web-cache
> > > > > > !
> > > > > > !
> > > > > > ip name-server z.z.z.z
> > > > > > !
> > > > > > no ip bootp server
> > > > > > call rsvp-sync
> > > > > > !
> > > > > > !
> > > > > > !
> > > > > > !
> > > > > > !
> > > > > > interface FastEthernet0/0
> > > > > > ip wccp webcache redirect out
> > > > > > ip address y.y.y.y y.y.y.y
> > > > > >
> > > > > >
> > > > > >
> > > > > > ###########GATEWAY#show ip wccp web-cache
> > > detail
> > > > > > WCCP Cache-Engine information:
> > > > > > IP Address: x.x.x.x ( ip
> > > > > address of cache Server)
> > > > > > Protocol Version: 2.0
> > > > > > State: Usable
> > > > > > Initial Hash Info:
> > > > > 00000000000000000000000000000000
> > > > > >
> > > > > 00000000000000000000000000000000
> > > > > > Assigned Hash Info:
> > > > > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > > > > > =
> > > > > > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > > > > > Hash Allotment: 256 (100.00%)
> > > > > > Packets Redirected: 1048
> > > > > > Connect Time: 00:24:23
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > ########My squid.conf looks like this
> > > > > >
> > > > > >
> > > > > > #######WCCP config with Squid
> > > > > >
> > > > > > wccp_router y.y.y.y
> > > > > > wccp2_router y.y.y.y
> > > > > >
> > > > > >
> > > > > > ###########My cache.log Looks Like this
> > > > > >
> > > > > >
> > > > > > 2003/01/10 19:36:23| Accepting HTTP
> > > connections at
> > > > > 0.0.0.0, port 3129, =
> > > > > > FD 11.
> > > > > > 2003/01/10 19:36:23| Accepting ICP messages at
> > > > > 0.0.0.0, port 3130, FD =
> > > > > > 12.
> > > > > > 2003/01/10 19:36:23| Accepting SNMP messages
> > > on
> > > > > port 3401, FD 13.
> > > > > > 2003/01/10 19:36:23| Accepting WCCP messages
> > > on
> > > > > port 2048, FD 14.
> > > > > > 2003/01/10 19:36:23| Accepting WCCP v2
> > > messages on
> > > > > port 2048, FD 15.
> > > > > > 2003/01/10 19:32:10| Incoming WCCP2_I_SEE_YOU
> > > > > received id =3D 868.
> > > > > > 2003/01/10 19:32:10| Incoming WCCP2_I_SEE_YOU
> > > > > member change =3D 17 =
> > > > > > tmp=3D17.
> > > > > > 2003/01/10 19:32:20| Incoming WCCP v2
> > > I_SEE_YOU
> > > > > length 132.
> > > > > > 2003/01/10 19:32:20| Incoming WCCP2_I_SEE_YOU
> > > > > received id =3D 869.
> > > > > > 2003/01/10 19:32:20| Incoming WCCP2_I_SEE_YOU
> > > > > member change =3D 17 =
> > > > > > tmp=3D17.
> > > > > > 2003/01/10 19:32:31| Incoming WCCP v2
> > > I_SEE_YOU
> > > > > length 132.
> > > > > > 2003/01/10 19:32:31| Incoming WCCP2_I_SEE_YOU
> > > > > received id =3D 870.
> > > > > > 2003/01/10 19:32:31| Incoming WCCP2_I_SEE_YOU
> > > > > member change =3D 17 =
> > > > > > tmp=3D17.
> > > > > > 2003/01/10 19:32:41| Incoming WCCP v2
> > > I_SEE_YOU
> > > > > length 132.
> > > > > > 2003/01/10 19:32:41| Incoming WCCP2_I_SEE_YOU
> > > > > received id =3D 871.
> > > > > > 2003/01/10 19:32:41| Incoming WCCP2_I_SEE_YOU
> > > > > member change =3D 17 =
> > > > > > tmp=3D17.
> > > > > > 2003/01/10 19:32:51| Incoming WCCP v2
> > > I_SEE_YOU
> > > > > length 132.
> > > > > >
> > > > > >
> > > > > > my Cisco Debug Log Looks Like this
> > > > > > 2w1d: WCCP-PKT:S00: Received valid Here_I_Am
> > > > > packet from x.x.x.x =
> > > > > > w/rcv_id 00000380
> > > > > > 2w1d: WCCP-PKT:S00: Sending I_See_You packet
> > > to
> > >
> > === message truncated ===
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> > http://mailplus.yahoo.com
> >
>
>
Received on Sun Jan 12 2003 - 08:45:16 MST