Re: [SQU] WCCP w/bad rcvd_id

Joe,

Perhaps this is another different question. However, I saw that you ask the
ip_gre or ip_wccp module is working correctly or not. That is a very
interesting issue for me.

I downloaded ip_wccp.c from Squid FAQ. When compiled it, I got some problems
(I captured the error message into text file) and ip_wccp.o was not created.

After trying to downloaded ip_wccp.o from Al Blake's web site (our Linux
version is same with his), and try to load (with modprobe) I got error
message again that explain modprobe cannot locate ip_wccp.o. I am very
curios about this problem.

Best Regards,

Awie

----- Original Message -----
From: "Joe Cooper" <joe@swelltech.com>
To: "vishwanath" <vish@gn.gtsl.co.in>
Cc: <squid-users@ircache.net>
Sent: Sunday, March 04, 2001 4:10 AM
Subject: Re: [SQU] WCCP w/bad rcvd_id

> If I recall correctly, this indicates that you may have conflicts with
> multiple IPs on your Squid box.
>
> Have you tried configuring either the wccp_incoming, or wccp_outgoing
> address (I don't remember which one of these fixed the problem for me in
> the past--but I think one of them did)?
>
> Also, are you sure the ip_gre or ip_wccp module is working correctly and
> unencapsulating the packets? While I've always been able to get both
> working here in the office, in the field I've had some problems with the
> patched ip_gre...and nothing I could do would make it work. Plugging
> ip_wccp into the same configuration worked flawlessly first time.
>
> Hope this helps.
>
> vishwanath wrote:
>
> > dear all
> > please help me...
> > i am trying to deploy squid 2.3STABLE4
> > with WCCP
> > i am using catalyst 6509 layer 3 switch IOS 12.1
> >
> > here is the output of wccp debug on catalyst
> >
> >
============================================================================
> > 6d23h: WCCP-EVNT: Here_I_Am packet from 206.102.1.100 w/bad rcvd_id
> > 00000000
> > 6d23h: WCCP-PKT: Sending I_See_You packet to 206.102.1.100 w/ rcvd_id
> > 0000000F
> > 6d23h: WCCP-EVNT: Here_I_Am packet from 206.102.1.100 w/bad rcvd_id
> > 00000000
> > 6d23h: WCCP-PKT: Sending I_See_You packet to 206.102.1.100 w/ rcvd_id
> > 00000010
> > 6d23h: %WCCP-5-CACHEFOUND: Web Cache 206.102.1.100 acquired
> > 6d23h: WCCP-PKT: Sending I_See_You packet to 206.102.1.100 w/ rcvd_id
> > 00000011
> > 6d23h: WCCP-EVNT: Here_I_Am packet from 206.102.1.100 w/bad rcvd_id
> > 00000000
> > 6d23h: WCCP-PKT: Sending I_See_You packet to 206.102.1.100 w/ rcvd_id
> > 00000012
> > 6d23h: WCCP-EVNT: Here_I_Am packet from 206.102.1.100 w/bad rcvd_id
> > 00000000
> >
============================================================================
> >
> >
> > i have tried using
> > wccp version 3 in squid instead of 4
> >
> > have configured the wccp_router correctly
> >
> > the setup works fine if i use route-map commands in switch
> >
> > thanx in advance
> >
> > vish
>
>
> --
> Joe Cooper <joe@swelltech.com>
> Affordable Web Caching Proxy Appliances
> http://www.swelltech.com
>
> --
> To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
>

--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html