Hello,
After using Cisco IOS 11.2(12)P I have noticed I did not have a
feature I absolutely needed, redirect-list. The redirect-list allows
you to setup ACLs on the Cisco router to say which packets will be
sent to Squid or not.
Anyhow, The system was working well under 11.2(12)P so I felt I
needed to try a higher version to get the feature mentioned above.
I loaded up the Cisco IOS and everything looked dandy until when I
checked the status of WCCP. It stopped sending packets to Squid. :(
Here is the output from the Cisco
Cisco3640#sh ip wccp
Global WCCP information:
Number of web-caches: 1
Total Packets Redirected: 0
Redirect access-list: -none-
Total Packets Denied Redirect: 0
Total Packets Unassigned: 154579
Group access-list: -none-
Total Packets Denied to Group: 0
Cisco3640#sh ip wccp web
WCCP Web-Cache information:
IP Address: xxx.xxx.xxx.xxx
Protocol Version: 0.3
State: Usable
Initial Hash Info: 00000000000000000000000000000000
00000000000000000000000000000000
Assigned Hash Info: 00000000000000000000000000000000
00000000000000000000000000000000
Hash Allotment: 0 (0.00%)
Packets Redirected: 0
Connect Time: 00:21:55
The problem is that it is not getting the Hash Allotment. On the
11.2(12)P IOS, I was getting a hash allotment of 256(100.0%). If
anyone out there is still using the 11.2 IOS to handle WCCP, with
FreeBSD, please contact me.
Received on Sat Aug 05 2000 - 00:58:32 MDT
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:54:44 MST