TCP (telnet) timeout means that you have networking issue.
Check firewalls, routing as well as if squid is started and is listening
on port (#netstat -ntpl on squid node).
On 12/01/2013 12:24 PM, janwen wrote:
> just try to use squid,i try to setup squid 2 days.
> i use squidclient http://www.googe.com get response on local machine,
> but when i try to connect to from remote ip(any ip is allowed for test),
> i use:
> telnet ip 3128 just get timeout exception.
>
> my squid.conf as follow:
> #
> # Recommended minimum configuration:
> #
> #user
> cache_effective_user squid
> cache_effective_group squid
>
> visible_hostname beerdark.com
> # Example rule allowing access from your local networks.
> # Adapt to list your (internal) IP networks from where browsing
> # should be allowed
> acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
> acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
> acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
> acl localnet src fc00::/7 # RFC 4193 local private network range
> acl localnet src fe80::/10 # RFC 4291 link-local (directly
> plugged) machines
> #acl all src 0.0.0.0/0.0.0.0
> acl SSL_ports port 443
> acl Safe_ports port 80 # http
> acl Safe_ports port 21 # ftp
> acl Safe_ports port 443 # https
> acl Safe_ports port 70 # gopher
> acl Safe_ports port 210 # wais
> acl Safe_ports port 1025-65535 # unregistered ports
> acl Safe_ports port 280 # http-mgmt
> acl Safe_ports port 488 # gss-http
> acl Safe_ports port 591 # filemaker
> acl Safe_ports port 777 # multiling http
> acl CONNECT method CONNECT
> acl testip src 222.73.112.140
>
> http_access allow all
> http_access allow testip
> #
> # Recommended minimum Access Permission configuration:
> #
> # Deny requests to certain unsafe ports
> http_access deny !Safe_ports
>
> # Deny CONNECT to other than secure SSL ports
> http_access deny CONNECT !SSL_ports
>
> # Only allow cachemgr access from localhost
> http_access allow localhost manager
> http_access deny manager
>
> # We strongly recommend the following be uncommented to protect innocent
> # web applications running on the proxy server who think the only
> # one who can access services on "localhost" is a local user
> #http_access deny to_localhost
>
> #
> # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
> #
>
> # Example rule allowing access from your local networks.
> # Adapt localnet in the ACL section to list your (internal) IP networks
> # from where browsing should be allowed
> http_access allow localnet
> http_access allow localhost
> http_access allow testip
> # And finally deny all other access to this proxy
> #http_access allow all
> http_access deny all
> # Squid normally listens to port 3128
> http_port 3128
>
> # Uncomment and adjust the following to add a disk cache directory.
> #cache_dir ufs /usr/local/squid/var/cache/squid 100 16 256
>
> # Leave coredumps in the first cache dir
> coredump_dir /usr/local/squid/var/cache/squid
>
> #
> # Add any of your own refresh_pattern entries above these.
> #
> refresh_pattern ^ftp: 1440 20% 10080
> refresh_pattern ^gopher: 1440 0% 1440
> refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
> refresh_pattern . 0 20% 4320
>
Received on Sun Dec 01 2013 - 09:29:18 MST
This archive was generated by hypermail 2.2.0 : Sun Dec 01 2013 - 12:00:03 MST