[squid-users] Re: squid + wccp2

Hi

Please guide me to clear my queries.

Thanks,
Benjamin

On Tue, Oct 11, 2011 at 7:22 PM, benjamin fernandis
<benjo11111_at_gmail.com> wrote:
> Hi All,
>
> We have requirement to configure squid to deploy with cisco wccp2.
>
> I have some confusion regarding configuration, kindly clear my queries
> and guide me to configure it.
>
>
> My current network senario:
>
> Wan side cisco 7200 router ( wan ip 84.24.xx.xx ) ( lan ip
> 149.255.xx.xx) ( lan ip is bgp routed ip pool )
>                      |
>                      |
>                      switch ---------------------squid box ( one
> interface only ip : 149.255.xx.19) ( gateway ip is router lan ip )
>                        |
>                        |
>                    End Users
>
>
> Now i need to configure squid to use with wccp.
>
>
>
> i tried to find reference document from google and squid wiki. But i
> have some queries,
>
>
> what is remote ip while configuring ip tunnel in squid and local ip ?
>
> as per my current configuration i tried : remote ip is router wan ip (
> 84.24.xx.xx) and local ip is squd ip ( 149.255.xx.xx )
>
>
> is it correct one ?
>
>
> and what is the wccp2_router router ip in squid.conf
>
> i used 149.255.xx.xx ( router lan ip )
>
> is it correct one ?
>
>
> ---------------------------------------------------------------------------------
> test 1
>
> actually i tried to configure router loop back ip on tunnel remote and
> squid ip as local ip on tunnel but that time i can see traffic on wccp
> interface and traffic on iptables nat redirection rule but no traffic
> in squid access.log and surfing is not working.
>
> ------------------------------------------------------------------------------------------------
>
> So please guide me , what could be right configuration while  going to
> use squid with wccp2.
>
>
> OS: fedora 15
> squid : 3.1.14
>
>
> Regards,
> Benjo
>
Received on Wed Oct 12 2011 - 14:31:20 MDT