Amos Jeffries wrote:
> On 23/02/11 19:50, Senthilkumar wrote:
>> Amos Jeffries wrote:
>>> On Wed, 23 Feb 2011 10:41:20 +0530, Senthilkumar wrote:
>>>> Hello All,
>>>>
>>>> We have a gateway machine which has three upstream isp and to make
>>>> clients use the particular isp we use advance routing based on the
>>>> source address. When we run squid on the same machine to log
>>>> websites all traffic passes through the single isp i.e. the isp which
>>>> is set as default gateway. We need all the users to pass through squid
>>>> and use different isp's as per source route.
>>>> Please share your views to achieve it.
>>>
>>> http://wiki.squid-cache.org/ConfigExamples/Strange/RotatingIPs
>>>
>>> Amos
>>>
>> Thank you very much Amos,
>>
>> We have clients in 10.X.X and 172.16.1.X and 172.16.2.X series, we need
>> each client series would use single isp for upload and download.
>> whether the following configuration achieve it?
>>
>> acl isp1 src 10.X.X
>> acl isp2 src 172.16.1.X
>> acl isp3 src 172,16.2.X
>>
>> acl download method GET HEAD
>> acl upload method POST PUT
>>
>> tcp_outgoing_address <isp1 ip> isp1 download upload
>> tcp_outgoing_address <isp2 ip> isp1 download upload
>> tcp_outgoing_address <isp3 ip> isp1 download upload
>
> No this wont work. Requests cannot have two methods (one up one down)
> simultaneously.
>
> The example was written by an ISP with a satellite and a ground link
> where direction of majority data traffic matters a lot. You do not
> need the method ACL. Only the src test.
>
> Amos
Thank you very much.
Received on Wed Feb 23 2011 - 11:33:22 MST
This archive was generated by hypermail 2.2.0 : Wed Feb 23 2011 - 12:00:03 MST