Hi, Amos
>> For example, if we do "squid -k reconfigure" in above adaptation
>> configuration,
>>
>> - The length of "*Adaptation::AllRules().items[0].acl" acl_access
>> list becomes twice. The old list could not be cleared...
>>
>> - There is mismatches between
>> print Adaptation::AllRules().items[0].acl.cfgline and
>> print Adaptation::AllRules().items[0].acl.aclList._acl.cfgline
>> I don't know why. The Adaptation::AllRules() list could be broken...
>
> Looks like another aspect related to referencing of adaptation configuration
> http://bugs.squid-cache.org/show_bug.cgi?id=2697
The former problem could be OK. but I don't know about the latter one.
I'd like to try the next release !
Sincerely,
-- Mikio Kishi On Sun, May 2, 2010 at 12:01 PM, Amos Jeffries <squid3_at_treenet.co.nz> wrote: > Mikio Kishi wrote: >> >> Hi, >> >>> I think that Adaptation::AllRules() config data is broken after >>> squid -k reconfigure. >>> Please check it ! >>> >>> Squid version: 3.1.1 >> >> I think that there are two problems. >> >>> acl aclA src XXX.XXX.XXX.XXX/32 >>> acl aclB src YYY.YYY.YYY.YYY/32 >>> acl aclC src ZZZ.ZZZ.ZZZ.ZZZ/32 >>> icap_service icapA reqmod_precache bypass=1 icap://127.0.0.1:XXXX/reqmod >>> icap_service icapB respmod_precache bypass=1 >>> icap://127.0.0.1:XXXX/respmod >>> adaptation_service_set req icapA >>> adaptation_service_set resp icapB >>> adaptation_access req allow aclA >>> adaptation_access req allow aclB >>> adaptation_access req allow aclC >>> adaptation_access resp allow aclA >>> adaptation_access resp allow aclB >>> adaptation_access resp allow aclC >> >> For example, if we do "squid -k reconfigure" in above adaptation >> configuration, >> >> - The length of "*Adaptation::AllRules().items[0].acl" acl_access >> list becomes twice. The old list could not be cleared... >> >> - There is mismatches between >> print Adaptation::AllRules().items[0].acl.cfgline and >> print Adaptation::AllRules().items[0].acl.aclList._acl.cfgline >> I don't know why. The Adaptation::AllRules() list could be broken... >> >> What do you think ? >> > > Looks like another aspect related to referencing of adaptation configuration > http://bugs.squid-cache.org/show_bug.cgi?id=2697 > > > Amos > -- > Please be using > Current Stable Squid 2.7.STABLE9 or 3.1.1 >Received on Sun May 02 2010 - 06:14:24 MDT
This archive was generated by hypermail 2.2.0 : Sun May 02 2010 - 12:00:03 MDT