[squid-users] squid transparent proxy setup

Hi everyone,

I'm currently attempt to setup a transparent proxy between my linksys router
and my wifi access point.

The hardware setup like the following
Linksys Router --> Ubuntu PC (2 Network Card) --> switch --> Access Point
--> Laptop
On the Ubuntu PC, eth0 is connected to the router, eth1 is connected to the
switch

I've read on how to setup transparent proxy using squid and seems to done
all setting properly. When I was about to test it, it realize that
1) eth1 doesn't have an IP
2) Computer connected to access point cannot obtain IP address

So as of this point, I can not test to see if my transparent proxy is
working or not. So here are my questions

1) How do I make the laptop that's connected to the access point obtaining
IP address from router? Do I need to setup DHCP service on Ubuntu PC and
give a different IP range?
2) Do I set a static IP for eth1? If I do, should I setup the static IP in
the same range as eth0? (eth0 now is 192.168.1.0/24, should I setup eth1
within 192.168.1.0/24 or some other IP range like 192.168.200.0/24)
3) On my Ubuntu box there is only Apache Server and Squid2 are installed, am
I missing any applications?

Thank you all in advanced

-- 
View this message in context: http://old.nabble.com/squid-transparent-proxy-setup-tp27002964p27002964.html
Sent from the Squid - Users mailing list archive at Nabble.com.