AW: AW: [squid-users] Troubleshooting squid: modified content

Jeff,

Thanks again. I will get the source of Squid3.0-stable14 and retry if that
solves my problem. That'll take a few days and envolves setting up a test
server, since I won't pollute my production proxy.

Peter

> -----Ursprüngliche Nachricht-----
> Von: Jeff Pang
> Gesendet: Montag, 4. Mai 2009 10:54
> An: Sig Pam - ITServ GmbH
> Cc: squid-users_at_squid-cache.org
> Betreff: Re: AW: [squid-users] Troubleshooting squid: modified content
>
> Sig Pam:
> > Jeff, thank you for your kind support.
> >
> > The technical description of my setup follows, after
> comments on your reply.
> >
> > If I get your config change correct, you bypass the squid
> proxying by using
> > kb.4d.com as a peer cache, right? Why do you do this? Were
> you able to
> > verify my problem if you run your squid WITHOUT your
> additional lines?
> >
>
>
> In last message I added those lines to squid.conf, that means
> I'm using
> squid as a reverse proxy.
> If you are not using reverse proxy, please ignore them.
>
> OK I adjust my squid as a common proxy, and tested your site
> (http://kb.4d.com/).
> All goes fine with the config below.
> I'm using Squid3.0-stable14, so you may be using this version
> of squid.
>
>
> http_port 8080
> icp_port 0
> hierarchy_stoplist cgi-bin ?
> cache_mem 1600 MB
> maximum_object_size 20480 KB
> maximum_object_size_in_memory 1024 KB
> memory_pools_limit 100 MB
> shutdown_lifetime 10 seconds
> cache_replacement_policy heap GDSF
> memory_replacement_policy heap GDSF
> cache_dir aufs /data/cache 51200 16 256
> access_log /data/logs/access.log
> cache_log /data/logs/cache.log
> cache_store_log none
> logfile_rotate 6
> strip_query_terms off
> pid_filename /data/logs/squid.pid
> coredump_dir /data/logs
> refresh_pattern ^ftp: 1440 20% 10080
> refresh_pattern ^gopher: 1440 0% 1440
> refresh_pattern (cgi-bin|\?) 0 0% 0
> refresh_pattern . 0 20% 900
> acl manager proto cache_object
> acl localhost src 127.0.0.1/32
> acl to_localhost dst 127.0.0.0/8
> acl SSL_ports port 443
> acl Safe_ports port 80 443
> acl CONNECT method CONNECT
> acl PURGE method PURGE
> http_access allow manager localhost
> http_access deny manager
> http_access deny !Safe_ports
> http_access deny CONNECT !SSL_ports
> http_access allow PURGE localhost
> http_access deny PURGE
> http_access allow all
> http_reply_access allow all
>
>
> --
> Jeff Pang
> DingTong Technology
> www.dtonenetworks.com
>
>
Received on Mon May 04 2009 - 09:01:05 MDT