[squid-users] c-icap blows up upon installation

I'm trying to implement clamav in tandem with squid, and installed
c-icap from ports on a freshly installed FreeBSD 6.2 box with a newly
updated ports tree.

When I start the program via '/usr/local/etc/rc.d/c_icap start', or
when the box is booted and 'c_icap_enable="YES"' is in /etc/rc.conf.

I've left a substantially similar message on freebsd-questions, and
have seen no response after about 24 hours, so am posting here in
hopes of someone being able to help here.

I get this from the command line:

----------
Starting c_icap.
Initialization of echo module......
Initialization of url_check module......
Segmentation fault (core dumped)
----------

and this from /var/log/messages

----------
May 31 12:32:28 zsquid c-icap: general, Setting parameter :Logger=sys_logger
May 31 12:32:28 zsquid c-icap: general, Setting parameter
:ServicesDir=/usr/local/lib/c_icap
May 31 12:32:28 zsquid c-icap: general, Loading service :echo_module
path srv_echo.so
May 31 12:32:28 zsquid syslogd: sendto: No route to host
May 31 12:32:28 zsquid syslogd: sendto: No route to host
May 31 12:32:28 zsquid c-icap: general, Found handler C_handler for
service with extension:.so
May 31 12:32:28 zsquid c-icap: general, Loading service
:url_check_module path srv_url_check.so
May 31 12:32:28 zsquid c-icap: general, Found handler C_handler for
service with extension:.so
May 31 12:32:28 zsquid c-icap: general, Loading service
:antivirus_module path srv_clamav.so
May 31 12:32:28 zsquid c-icap: general, Found handler C_handler for
service with extension:.so
May 31 12:32:28 zsquid kernel: pid 3244 (c-icap), uid 0: exited on
signal 11 (core dumped)
----------

Many Thanks for any help you might be able to give.

Kurt
Received on Thu May 31 2007 - 13:39:09 MDT