Re: [squid-users] Large ACL problem

Alexandre,

Mind if i ask what version of Berkeley DB your using?

I was installing squidguard last week with 4.1, 4.2 and 4.5
checked the squidguard mailing lists and found out you need a older version
So i tried 3.3 but squidguard's complaining it still cant find it even with
-with-db=DIR set to the right location.

Thanks for your help.
-Chris
>>> "Alexandre Correa" <alexandre@sabbath.com.br> 3/27/2007 3:41:17 PM >>>
>>i´m using squid with squidguard .. about 3.000.000 of expressions..
>>squidguard is working veryyy good.. you can try... but my system is
>>Linux.. for solaris.. i believe that you can change some codes (or not
:P)

On 3/27/07, Chris Rosset <Chris.Rosset@businesswire.com> wrote:
> Hello,
>
> I am still having a issue with high CPU usage.
> In a previous post it was suggested that my ACL (which is 8k+ lines)
> could be the culprit.
> Also i am going to try a newer squid version, currently i am on 2.5.6
> going to try both
> squid-2.5.STABLE14 and a squid2.6.x version
>
> I noticed in the FAQ that using --enable-gnuregex might help on large
> ACL's?
> http://wiki.squid-cache.org/SquidFaq/SystemWeirdnesses#head-91b0cf15c4781cd7b3248e3663ac85baef66e70f
>
>
> but the config --h info seems to indicate it might not.
> --enable-gnuregex Compile GNUregex. Unless
> you have reason to use this
> option, you
> should not enable it. This library file
> is usually
> only required on Windows and very old
> Unix boxes
> which do not have their own regex library
> built in.
>
> I am running Solaris 8
> uname -a
> SunOS sfsysdev4 5.8 Generic_117350-45 sun4u sparc SUNW,Ultra-250
>
> So just checking if the --enable-gnuregex might help, or should i go
> with squidgard or squirm some other redirector?
>
> Thanks for your help.
>

-- 
Sds.
Alexandre J. Correa
Onda Internet / OPinguim.net
http://www.ondainternet.com.br 
http://www.opinguim.net