tor 2006-12-21 klockan 06:46 -0800 skrev Khandakar Amir Faisal:
> I have three servers, two is on windows OS (www,
> application) and other is on RHEL 4 (mail server).
> Configure Cisco PIX 501 to allow these three servers
> to go internet and some traffic can come in. These pix
> is only configure for this three servers only.
> My 3 server have 3 local IP say 10.1.1.1, 10.1.1.2
> 10.1.1.3 mapped to an static IP in PIX say
> xxx.xxx.xxx.200, xxx.xxx.xxx.201, xxx.xxx.xxx.202
> (Public IP).
Try
echo 0 >/proc/sys/net/ipv4/tcp_ecn
echo 0 >/proc/sys/net/ipv4/tcp_window_scaling
if it makes a difference then the firmware of your PIX is broken.
If no difference then triple check the routing setup on the RedHat
server..
Regards
Henrik
This archive was generated by hypermail pre-2.1.9 : Mon Jan 01 2007 - 12:00:01 MST