Re: [squid-users] WCCP on Squid 2.6 (URGENT)

On Thu, Dec 07, 2006, Dumpolid Exeplish wrote:
> "So your confusion isn't that its working, but Netenforcer isn't reporting
> any traffic savings? "
>
> Precisely, NetEnforcer is not giving a physical (or logical) report on
> badndidw usage reduction

I still don't get this. Can you be more specific with regards to what
figures Netenforcer is reporting to indicate this?

> i got these values from the Cache Manager CGI
>
> sample_start_time = 1165496653.636038 (Thu, 07 Dec 2006 13:04:13 GMT)
> sample_end_time = 1165496953.638503 (Thu, 07 Dec 2006 13:09:13 GMT)
> client_http.requests = 48.112938/sec
> client_http.hits = 15.986535/sec
> client_http.errors = 0.000000/sec
> client_http.kbytes_in = 41.296327/sec
> client_http.kbytes_out = 476.482752/sec
>
> i think these are pritty cool figures though and this actually shows
> that Squid is actievely working
>
> About the L2 redirects, how can i cnfigure this? can you please help
> with configuration linse for both Squid and L2?
>
> or is is just as simple as the below:
>
> wccp2_router (router public ip)
> wccp2_address (eth0 Public ip)
> wccp2_service standard 0 password=*******
> wccp2_forwarding_method 2

Yup.

>
> could u please help with Cisco side configs specific for 6509

Not unless someone wants to donate a Catalyst 6503 with Sup2/MSFC2 or
a few people buy a basic Squid support contract from me. :)

If you spend some time checking the archives you'll find cat-65xx
examples; but basically I think you've got it right (ie, its working
and traffic is making it to the proxy.)

Just:

show run | inc wccp

You should've defined a wccp web-cache group and redirected traffic
in from your internal interface. For the most part this config looks
the same as it would on any other Cisco router running WCCPv2 for
traffic redirection.

Then, just;

show ip wccp web-cache <-- summary
show ip wccp web-cache detail <-- tells you which caches are considered valid,
  their current traffic bucket assignment and redirection method (L2 or GRE.)
  You want it to show up with a current bucket assignment of all Fs (ie, all the
  bits are set, so its getting all the redirected traffic) w/ L2 redirection
  method.
show ip wccp web-cache view <-- tells you whats registered

Adrian

-- 
- Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid Support -