RE: [squid-users] Squid + RHEL4 + ip_gre issue

Yes, I did change those system settings mentioned in FAQ, including
enabling routing, etc.

[awang@rcarhlp02.qrs.com awang]
$cat /proc/sys/net/ipv4/conf/wccp0/rp_filter
0

 
On Thu, 2006-08-03 at 20:06 +0200, Henrik Nordstrom wrote:
> Looks fine.
>
> And "cat /proc/sys/net/ipv4/conf/wccp0/rp_filter"?
>
> (should be 0)
>
> Regards
> Henrik
>
> tor 2006-08-03 klockan 10:34 -0700 skrev Arnold Wang:
> > [root@rcarhlp02 tmp]# ip addr show dev wccp0
> > 4: wccp0@eth0: <POINTOPOINT,NOARP,UP> mtu 1476 qdisc noqueue
> > link/gre 10.17.2.146 peer 10.17.2.65
> > inet 192.168.1.6/31 scope global wccp0
> >
> > Thanks again for your kind helps.
> >
> > On Thu, 2006-08-03 at 08:44 +0200, Henrik Nordstrom wrote:
> > > ons 2006-08-02 klockan 22:22 -0700 skrev Arnold Wang:
> > >
> > > > The configuration in the RHEL box:
> > > > [root@rcarhlp02 ~]# ip tunnel show
> > > > gre0: gre/ip remote any local any ttl inherit nopmtudisc
> > > > wccp0: gre/ip remote 10.17.2.65 local 10.17.2.146 dev eth0 ttl
> > > > inherit
> > > > sit0: ipv6/ip remote any local any ttl 64 nopmtudisc
> > >
> > > what does "ip addr show dev wccp0" say?
> > >
> > > Regards
> > > Henrik
Received on Thu Aug 03 2006 - 13:03:02 MDT