RE: [squid-users] Squid + RHEL4 + ip_gre issue

I believe so. Here is the configuration related to WCCP/GRE in my
router:
ip wccp version 1
ip wccp web-cache redirect-list 130
....
interface Tunnel0
 ip address 192.168.1.7 255.255.255.254
 tunnel source 10.17.2.65
 tunnel destination 10.17.2.146
.....
interface Vlan13
 ip address 10.17.11.2 255.255.255.0
 ip wccp web-cache redirect in

The configuration in the RHEL box:
[root@rcarhlp02 ~]# ip tunnel show
gre0: gre/ip remote any local any ttl inherit nopmtudisc
wccp0: gre/ip remote 10.17.2.65 local 10.17.2.146 dev eth0 ttl
inherit
sit0: ipv6/ip remote any local any ttl 64 nopmtudisc

Thanks for the reply.

-----Original Message-----
From: Henrik Nordstrom [mailto:henrik@henriknordstrom.net]
Sent: Wednesday, August 02, 2006 6:32 PM
To: Arnold Wang
Cc: squid-users@squid-cache.org
Subject: Re: [squid-users] Squid + RHEL4 + ip_gre issue

ons 2006-08-02 klockan 16:27 -0700 skrev Arnold Wang:

> Is my reading on the trace correct? If so, does is really mean the
> ip_gre module comes with RHEL 4 doesn't support WCCP? Is there a
> way/command to verify whether the ip_gre module in my system supports
> WCCP?

Have you created the wccp gre tunnel to the router? (see FAQ)

Regards
Henrik
Received on Wed Aug 02 2006 - 23:21:36 MDT