[squid-users] squid + wccp problem

Hi,

I have configured Squid25s10 with WCCP. Linux kernel version 2.6.9.22. IOS
verison 12.2(29).

The packets are redirected to squid from the Cisco router and the tcpdump
output is given below

# tcpdump -nei any not port 22
tcpdump: WARNING: Promiscuous mode not supported on the "any" device
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on any, link-type LINUX_SLL (Linux cooked), capture size 96 bytes

22:17:29.357622 < 00:02:b9:8b:dd:62 ip 100: IP X.X.X.X > Y.Y.Y.Y:
gre-proto-0x883e
22:17:29.357800 < ip 76: IP z.z.z.z.32925 > A.A.A.A.http: S
3049448041:3049448041() win 5840 <mss 1460,sackOK,timestamp 621443204
0,nop,wscale 2>

22:17:32.356726 < 00:02:b9:8b:dd:62 ip 100: IP X.X.X.X > Y.Y.Y.Y:
gre-proto-0x883e
22:17:32.356726 < ip 76: IP z.z.z.z.32925 > A.A.A.A.http: S
3049448041:3049448041(0) win 5840 <mss 1460,sackOK,timestamp 621446204
0,nop,wscale 2>

For this i assume that gre packets are recieved in the squid machine and
decapsulation works fine. Also I can see the packet counts that are
redirected thru iptables to the squid port

# iptables -t nat -L -n -v

11015 987K REDIRECT tcp -- gre1 * 0.0.0.0/0
0.0.0.0/0 redir ports 3128

But the squid is not getting any access information in the access.log What
would be the cause of the problem?

Thanks,
Senthil Murugan
Received on Wed Nov 02 2005 - 13:25:38 MST