Move all the cache files and log files to a mount point with 20 gig, The Drive
is not full and I turned debug on in squid.conf just recently, Waiting for it
to fail again. When it does, I'll look for the debug file.
______________________________________________________________________________
| John R. Van Lanen, Manager of Network Operations Voice: (330) 264-6047 |
| Tri-County Computer Services Association (TCCSA) Fax: (330) 264-5703 |
| "Do not meddle in the affairs of dragons, E-mail:vanlanen@TCCSA.NET|
| because you are crunchy and taste good with ketchup" |
------------------------------------------------------------------------------
> > Running Squid Stable 2.5 ver 3 that comes with the
> > Redhat ES 3.0
> >
> > The issue I have is that squid will stop dead,
> >
> > Do a squid status and it shows
> >
> > squid dead but pid file exists
> > squid: ERROR Could not send signal 0 to process
> > 5530: (3) No such process,
> >
> > Have seen this before, restart squid or rebooting
> > solves the issue for awhile,
> > but, under load it occurrs again.
> >
> > The 5530 process number changes.
> >
> > Cache.log shows nothing but normal stuff.
> >
> > Searching the net shows others with the same issues
> > but can't find a solution.
> Start squid in debug mode as,
> ./squid -NCd10
> what are you getting there?
> Is your cache directory getting FULL? Check the
> directory size.
> ==================================================
> Best Regards,
> Squid Runner Support
> squidrunner_dev at yahoo dot com
> Web: http://geocities.com/squidrunner_dev/
> Support: runnersupport at gmail dot com
> SquidRunner - An Automatic Squid Builder
> ==================================================
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
Received on Thu Aug 25 2005 - 06:31:05 MDT
This archive was generated by hypermail pre-2.1.9 : Thu Sep 01 2005 - 12:00:02 MDT