RE: [squid-users] RPM rebuild FC3 Error

Grant:

See my previous message to the list for the config example and the
explanation re: wccpv2.

Couple of things you can do to check the Linux/Squid side of things:
# tcpdump -i ethX 'host 192.168.1.1'

where 'X' is the interface squid uses to talk to the ip (192.168.1.1) of
the 6506 on VLAN90. You should see this:

---------------
15:26:37.804320 IP 192.168.1.1 > 192.168.1.5: gre-proto-0x883e
15:26:37.972262 IP 192.168.1.1 > 192.168.1.5: gre-proto-0x883e
15:26:38.906903 IP 192.168.1.5.2048 > 192.168.1.1.2048: UDP, length 52
15:26:38.907212 IP 192.168.1.1.2048 > 192.168.1.5.2048: UDP, length 108
15:26:38.918381 IP 192.168.1.1 > 192.168.1.5: gre-proto-0x883e
15:26:38.920019 IP 192.168.1.1 > 192.168.1.5: gre-proto-0x883e
---------------

--Maxx

On Fri, 2005-06-17 at 14:43, Sturgis, Grant wrote:
> Great help, thanks. Any chance you could share your IOS config with me?
>
> I have this:
>
> ip wccp web-cache
> ip wccp version 2
>
> and then:
>
> int vlan90
> (config-if)ip wccp web-cache redirect in
>
>
> But when I do a sh ip wccp I get:
>
> Bushmaster#sh ip wccp
> Global WCCP information:
> Router information:
> Router Identifier: -not yet determined-
> Protocol Version: 2.0
>
> Service Identifier: web-cache
> Number of Cache Engines: 0
> Number of routers: 0
> Total Packets Redirected: 0
> Redirect access-list: -none-
> Total Packets Denied Redirect: 0
> Total Packets Unassigned: 0
> Group access-list: -none-
> Total Messages Denied to Group: 0
> Total Authentication failures: 0
> > -----Original Message-----
> > From: Maxx Christopher Lobo [mailto:maxx@arraycomm.com]
> > Sent: Friday, June 17, 2005 2:46 PM
> > To: Sturgis, Grant
> > Subject: Re: [squid-users] RPM rebuild FC3 Error
> >
> >
> > Grant:
> >
> > Recompiling the SRPM and dealing with this config can be a
> > real hassle. I've got an environment very similar to yours:
> > Cisco 6509, Squid on FC3, trying to keep the box on RPMS and
> > away from the source tree for ease of patch management and
> > reduce admin stress.
> >
> > Here's the binary RPM you need, built with both options (netfilter and
> > wccp) and with the customlog patch thrown in (converts squid
> > logs to the HTTP combinedlog format, which allows you to run
> > AWstats against the logs to see a PHP page of everything
> > you'd ever want to know about browsing habits of your users)
> >
> > Let me know if you have any problems. I'm not cc'ing the list
> > on this message because of the RPM attachment, but please do
> > so for the rest of our correspondence.
> >
> > Thanks-
> >
> > PS: another suggestion: if you use 'yum' to keep the box up
> > to date, I recommend adding the line "exclude=squid" to the
> > yum.conf file, otherwise future updates will erase your custom RPM.
> >
> > --Maxx
Received on Fri Jun 17 2005 - 16:29:16 MDT