RE: [squid-users] Hotmail problem (2.4STABLEx solution)

Thanks for your reply. When I added that line my squid came back with

"2004/12/29 10:12:17| parseConfigFile: line 53 unrecognized: 'header_access
Accept-Encoding deny all'"

Do you mean http_access?

Thanks!

-----Original Message-----
From: Trevor [mailto:trevor@gnuguy.com]
Sent: December 28, 2004 12:11 PM
To: Angela Burrell
Cc: Lucia Di Occhi; squid-users@squid-cache.org
Subject: RE: [squid-users] Hotmail problem (2.4STABLEx solution)

This question has been answered before, but here it is again:

For 2.4 (STABLE6 and STABLE7), use your editor to add a new line to your
/etc/squid/squid.conf (it may be somewhere else) file.

Add the following line:
header_access Accept-Encoding deny all

Save your file and restart squid. I use "service squid restart" (RH2.1AS).
That's it. 2.4 cannot support ACL's in the header access line (only 2.5+
can).

-- Trevor.
www.gnuguy.com

-----Original Message-----
From: Angela Burrell [mailto:angela@jobsearchnetwork.ca]
Sent: Friday, December 24, 2004 1:00 PM
To: Henrik Nordstrom; Trevor
Cc: Jose Gervasio Gomiz; squid-users@squid-cache.org
Subject: RE: [squid-users] Hotmail problem

I also have 2.4.STABLE7; I believe the Hotmail problem was resolved by MSN
but I haven't turned squid back on yet.
I was unable to implement the hotmail solution for the reason given below.

I would consider to update my squid; but the instructions on the Squid FAQ
site don't make sense to me (run 3 squid servers at once or something, then
you upgrade one, but with no instructions on how to do it.)

Since upgrading would supposedly enable the Hotmail workaround, could
someone please point me to a *good* tutorial on how to do it (withOUT the
FAQ, thanks). Also, Do I need to upgrade any packages in my kernel to do
that? I have 2.4.18. Thanks

-----Original Message-----
From: Henrik Nordstrom [mailto:hno@squid-cache.org]
Sent: December 22, 2004 6:56 PM
To: Trevor
Cc: Jose Gervasio Gomiz; squid-users@squid-cache.org
Subject: RE: [squid-users] Hotmail problem

On Wed, 22 Dec 2004, Trevor wrote:

> I get a:
> 2004/12/22 10:26:05| parseConfigFile: line 32 unrecognized: 'header_access
> Accept-Encoding deny hotmail_domains '
>
> It looks like 2.4.STABLE7 does not support the "header_access" option.
> Anything similar config lines to try, before I update to 2.5?

Squid-2.4 has something similar, but I do not remember what it was.
Something about anonymization.

You really should update..

Regards
Henrik

--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.4 - Release Date: 12/22/2004
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 12/28/2004