RE: [squid-users] Client can't connect but No log

 I describes in check no 5.
 Error mesage is not squid error message.
 It's noramil internet error message.
 "Not found DNS server or web server."


-----Original Message-----
From: dwi@bisminet21.ath.cx [mailto:dwi@bisminet21.ath.cx]
Sent: Monday, July 12, 2004 1:00 PM
To: engineer@hyperdigm.co.kr
Subject: Re: [squid-users] Client can't connect but No log


> Hi all !
> Thanks help me about 'Sement fault'
> Then I reconfigure squid below
> ./configure --prefix=/usr/local/squid --sysconfdir=/usr/local/squid/etc
> --enable-default-language=Korean
> make
> make install
>
> and squid.conf is below.
> -- squid.conf --
> http_port 3128
> cache_mem 62 MB
> cache_dir ufs /usr/local/squid/var/cache 100 16 256
> cache_access_log /usr/local/squid/var/logs/access.log
> cache_log /usr/local/squid/var/logs/cache.log
> pid_filename /usr/local/squid/var/logs/squid.pid
> dns_retransmit_interval 5 seconds
> dns_timeout 1 minutes
> negative_ttl 30 second
> negative_dns_ttl 1 minute
> read_timeout 3 minutes
> ########## user define acl
> acl mynet1 src 192.168.1.0/24
> acl mynet2 src 192.168.3.0/24
> acl home dstdomain "/usr/local/squid/etc/nocache.dst"
> acl client src "/usr/local/squid/etc/client.ip"
> no_cache deny home
> #########################
> http_access all client
> cache_effective_user squid
> cache_effective_group squidadm
> memory_pools off
> ------------------------------------------------
>
> It's all right last 3 days.
>
> This morning sub office user call me and sad "I can't internet!"
> I checked client
> 1. Ping is O.K to server from clinet.
> 2. In origin setting can internet.
> 3. telnet is O.K to server
> 4. Error mesasge is not squid error message. It's normal internet error
> message "Dns not found"
> 5. No error in cache.log and access.log
> 6. Not all sub office user, random sub user frequently this error
>
> Main office and sub office connected router via leased line.
> and main office and ISP connected fiber cable via VPN.
>
> subclient ----router--router--switch - vpn--ISP
> |
> mainclinet(include squid server)
>
> Server SPEC
> 667Mhz single , 128+256 ECC Reg Memory , 9 + 36G 10000RPM Ultra3 SCSI HDD
> , 1 NIC
> O/S
> Redhat 7.3 Default Install setting(Don't kernel compile)
>

You didn't describe what error seen by client, is it IE error or squid error.

:DAMK:
Received on Sun Jul 11 2004 - 23:06:18 MDT