Re: [squid-users] Need help about SQUID + WCCP2 and cisco router with IOS 12.2(13b)

ok henrik i make the changes in the GRE like said in the FAQ section doing
the next

modprobe ip_gre
iptunnel add gre1 mode gre remote <Router-IP> local <Host-IP> dev
<interface>
ifconfig gre1 127.0.0.2 up
modprobe ip_wccp
and check it with
/sbin/lsmod
and both modules are in

i use the patch made by you the ip_wccp path that i mentioned ip_wccp.patch
that was in http://squid.visolve.com/developments/wccpv2.htm
do i need another patch ?? for wccp2 and if its needed where can i find it?

tks

----- Original Message -----
From: "Henrik Nordstrom" <hno@squid-cache.org>
To: "Ing Wahib Bohsain Navarro" <wahib@phoenix.intermatsa.com.mx>
Cc: <squid-users@squid-cache.org>
Sent: Tuesday, January 27, 2004 4:54 PM
Subject: Re: [squid-users] Need help about SQUID + WCCP2 and cisco router
with IOS 12.2(13b)

> On Tue, 27 Jan 2004, Ing Wahib Bohsain Navarro wrote:
>
> > with the show ip wccp web-cache deatil i see packets redirected 612450
the
> > router is redirecting packets
>
> Ok. So the WCCP negotiation work which means the WCCP parts in squid.conf
> and the router is correctly configured.
>
> > Does browsing work at all?
> > the browsing doesn't work at all
>
> Do you get a error message from Squid, or just timeout after a long time?
>
> If timeout then the problem is then in how the cache server deals with
> WCCP/GRE packets or how it intercepts the requests contained within those
> packets.
>
> If error message from Squid then you have not configured squid.conf for
> interception caching.
>
> >> Is the ip_wccp v2 module loaded on your Linux box?
> >
> > i did the instrucctions to patch the kernel like say in
> > http://squid.visolve.com/developments/wccpv2.htm
> > http://squid.visolve.com/developments/wccpv2_install.htm
> > any sugestions?
>
> Well, those instructions only tell you how to build the module. You also
> needs to load the module in the same manner as is the case for WCCPv1
> described in the Squid FAQ.
>
> > I don't using any firewall at all no ipchains, and no iptables, i got
that
> > services down.
>
> You need these. See the Squid FAQ on interception caching.
>
> >> Have you configured the required interception caching settings in
> >> squid.conf?
> >
> > what is the right config file ?
>
> Again, see the Squid FAQ on interception caching.
>
> Regards
> Henrik
>
>
Received on Thu Jan 29 2004 - 16:22:50 MST