hi
wht OS u r using for squid is linux or somthing else
and r u using port redirections on it
Regards
Farrukh Mahmood
----- Original Message -----
From: John Hally <JHally@epnet.com>
Date: Thursday, September 25, 2003 10:31 pm
Subject: RE: RE: [squid-users] WCCP help
> Just tried that, and it didn't work. I'm in the 12.2 IOS train,
> but figured
> I'd try anyway.
>
>
>
> -----Original Message-----
> From: Farrukh Mahmood [mailto:farrukh_mahmood@eworld.net.pk]
> Sent: Thursday, September 25, 2003 12:24 PM
> To: John Hally
> Cc: 'Farrukh Mahmood'; 'squid-users@squid-cache.org'
> Subject: Re: RE: [squid-users] WCCP help
>
>
> hi
>
> try this in ur squid.conf
>
>
> wccp_version 3
>
> Regards
> Farrukh Mahmood
>
>
>
> ----- Original Message -----
> From: John Hally <JHally@epnet.com>
> Date: Thursday, September 25, 2003 9:27 pm
> Subject: RE: [squid-users] WCCP help
>
> > yup,
> >
> > that shows that it knows about the cache device and that its
> > redirectingpackets, so the router config looks ok. It feels
> like
> > I'm dealing with an
> > acl or something in the squid.conf file and the redirects are
> getting> denied.
> >
> > I'm not sure where the problem lies, but with WCCP disabled I
> can
> > point my
> > browser at the squid cache, get results and see entries in the
> > cache logs.
> > I can also simply not proxy and get results, but if I turn on
> > WCCP, the
> > browser spins, and then gets 'connection refused' msgs.
> >
> > Does anyone who has WCCP working feel like donating a sample
> > squid.conf file
> > for me to compare to?
> >
> > thanks
> >
> > -----Original Message-----
> > From: Farrukh Mahmood [mailto:farrukh_mahmood@eworld.net.pk]
> > Sent: Thursday, September 25, 2003 11:58 AM
> > To: John Hally
> > Subject: Re: [squid-users] WCCP help
> >
> >
> > hi
> >
> >
> > check this command on ur router sh ip wccp web_cache detail
> >
> > does it shows u some thing and second thing how u know that ur
> > cache is
> > not working.
> >
> >
> > Regards
> > FArrukh Mahmood
> >
> > ----- Original Message -----
> > From: John Hally <JHally@epnet.com>
> > Date: Thursday, September 25, 2003 8:59 pm
> > Subject: [squid-users] WCCP help
> >
> > > Hello Everyone,
> > >
> > > I searched the archives and ran thru the 600+ threads I found,
> > but
> > > eithermissed something or couldn't find the answer. The
> problem
> > > I'm having is
> > > this. I set up WCCP on my Cisco router and see that its
> > > redirecting packets
> > > to the cache (using the sh ip wccp cmds), but it looks as
> though
> > > the cache
> > > never services the request. Here's what I've done:
> > >
> > > On squid box:
> > >
> > > (From http://www.squid-cache.org/Doc/FAQ/FAQ-17.html)
> > >
> > > http_port 8080
> > > httpd_accel_host virtual
> > > httpd_accel_port 80
> > > httpd_accel_with_proxy on
> > > httpd_accel_uses_host_header on
> > >
> > > wccp_router xxx.xxx.xxx.xxx (router ip)
> > > wccp_version 4
> > >
> > >
> > > On the router:
> > >
> > > (global config)
> > > ip wccp version 1
> > > ip wccp web-cache (only care about http traffic at the moment)
> > >
> > > int fa0/0
> > >
> > > ip wccp web-cache redirect in
> > >
> > >
> > > as soon as I add the entry to the interface, web browsing
> comes
> > to a
> > > screeching halt and I get 'connection refused' messages from
> the
> > > browserafter ~30 seconds.
> > >
> > > Has anyone had any luck with WCCP and/or can tell me what I
> may
> > be
> > > doingwrong?
> > >
> > > Thanks a TON in advance,
> > >
> > > John H.
> > >
> > >
> >
> >
>
>
Received on Thu Sep 25 2003 - 11:32:06 MDT
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:20:02 MST