update :-)
i changed wccp_version to 4 in squid
and restarted wccp on cisco
now show ip wccp web-cache detail shows protocol 0.4
and squid is redirecting packets ( YES ! :-) )
but still browsing doesn't work
nothing appears in squid access.log,
ans squid doesn;t reply to the redirected packets
tcpdump shows:
....
08:44:01.446248 192.168.45.1 > 192.168.45.2: gre-proto-0x883E (gre encap)
08:44:01.446692 192.168.45.1 > 192.168.45.2: gre-proto-0x883E (gre encap)
08:44:01.447083 192.168.45.1 > 192.168.45.2: gre-proto-0x883E (gre encap)
08:44:01.447429 192.168.45.1 > 192.168.45.2: gre-proto-0x883E (gre encap)
08:44:01.447778 192.168.45.1 > 192.168.45.2: gre-proto-0x883E (gre encap)
08:44:01.448213 192.168.45.1 > 192.168.45.2: gre-proto-0x883E (gre encap)
08:44:01.448580 192.168.45.1 > 192.168.45.2: gre-proto-0x883E (gre encap)
so only packets from cisco to squid, and none coming back
anyway, at least i'm a bit further now :-)
I wonder, maybe something is wrong with the ip_wccp module,
since lsmod still shows it is unused.
I suppose it should show used, when I started the gre tunnel.
So maybe I should start in some other way, than :
ip tunnel add cisco mode gre remote 212.244.a.b local 212.244.a.c ttl 255
ip link set cisco up
ip addr add 192.168.45.2 dev cisco
ip route add 192.168.45.0/24 dev cisco
Kuba
Received on Thu Aug 28 2003 - 00:32:24 MDT
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:19:10 MST