[squid-users] cisco cache engine+sqquid

Dear Henrik and Ahmad,

Kindly suggest

I am running squid+wccp and i have a cisco 505 cache engine, how to add both
to the network so that half the requests go to the squid and half to the
cisco cache.
I have Cisco 3660 router.

Is it possibel if i can select that 1 network is to be cached from squid and
the other from the cisco cache.

   Regards

   Sukhjit Singh
   Network Administrator
   Emmsons Infotech Ltd.
   SCO 13-14-15, Sec 34A,
   Chandigarh-160 022
   (Ph): +91 172 606664
   Mobile 9815228132
   sukhjits@emmtel.com
   http://www.emmtel.com

----- Original Message -----
From: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>
To: "Sukhjit Singh" <sukhjits@emmtel.com>; "Samuel Abreu de Paula"
<mlists@dnadigital.com.br>; <squid-users@squid-cache.org>; "Henrik
Nordstrom" <hno@squid-cache.org>
Cc: <squid-users@squid-cache.org>
Sent: Wednesday, June 04, 2003 5:11 PM
Subject: Re: [squid-users] one question+vmstat+squid

> According to your mem and cpu statistics your machine is running fine..
now
> if you talk about client browsing problem can be in....
>
> 1 Configure proxy manually in your borwser and check your cache working
fine
> or problem in cache. even ask to your some clients for checking.
>
> if manually adding proxy is working fine. Then check transparent wihtout
> WCCP... if it is also working then problem can be WCCP....
>
> now how to solve WCCP problem...
>
> Respected Henrik already have told you MTU problem but most of client
packet
> comes with 1500 plus MTU..I will suggest check your wccp module load it
> again..
> also check wccp router redirecting or getting packet from cache or not..
>
> WCCP packets.... check router
> show ip wccp webcache detail etcc
>
> update us if you need some more help
> --
>
> Best Regs,
> Masood Ahmad Shah
> System Administrator
>
> ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
> | * * * * * * * * * * * * * * * * * * * * * * * *
> | Fibre Net (Pvt) Ltd. Lahore, Pakistan
> | Tel: +92-42-6677024
> | Mobile: +92-300-4277367
> | http://www.fibre.net.pk
> | * * * * * * * * * * * * * * * * * * * * * * * *
> ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
> Unix is very simple, but it takes a genius to understand the simplicity.
> (Dennis Ritchie)
> "All I want is a few minutes alone with the source code for the universe
and
> a quick recompile."
>
>
> ----- Original Message -----
> From: "Sukhjit Singh" <sukhjits@emmtel.com>
> To: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>; "Samuel Abreu de
Paula"
> <mlists@dnadigital.com.br>; <squid-users@squid-cache.org>; "Henrik
> Nordstrom" <hno@squid-cache.org>
> Cc: <squid-users@squid-cache.org>
> Sent: Wednesday, June 04, 2003 1:22 PM
> Subject: Re: [squid-users] one question+vmstat+squid
>
>
> Dear Ahmad,
>
> You have helped me many times, kindly see what is the problem am stuck in.
>
> The stats of the free -m command are below
>
> [root@CACHE root]# free -m
> total used free shared buffers cached
> Mem: 501 497 4 0 69 208
> -/+ buffers/cache: 219 281
> Swap: 515 0 515
>
>
> The stats of the cat /proc/meminfo are below.
>
> [root@CACHE root]# cat /proc/meminfo
> total: used: free: shared: buffers: cached:
> Mem: 525897728 521408512 4489216 0 72478720 218476544
> Swap: 540729344 311296 540418048
> MemTotal: 513572 kB
> MemFree: 4384 kB
> MemShared: 0 kB
> Buffers: 70780 kB
> Cached: 213212 kB
> SwapCached: 144 kB
> Active: 81304 kB
> Inactive: 244508 kB
> HighTotal: 0 kB
> HighFree: 0 kB
> LowTotal: 513572 kB
> LowFree: 4384 kB
> SwapTotal: 528056 kB
> SwapFree: 527752 kB
>
>
>
> I have 512MB physical mem and it is just showing 4MB free, its ok if you
say
> it is a normal procedure, now the problem is that i have PIII 1.7GHz
> processor and 3 SCSI drives (8GB each)
> i have put my all dial up customers of squid+wccp and there are about 400
> req/min, and i have my own pc also on squid+wccp in order to check the
> performance.
> ON dialup the customers are not able to open the sites where as it is
> performing alright on my pc.
> The hits are coming but there is no browsing on the customer side.
> What can be the probable solution, first of all tell me how to check if
the
> squid has enough resorces in terms of cpu utilizations and RAM (Memory you
> are saying is enogh), then if every thing
> is fine why the customers are not able to open sites.
> Kindly show some way.
>
>
>
> Regards
>
> Sukhjit Singh
> Network Administrator
> Emmsons Infotech Ltd.
> SCO 13-14-15, Sec 34A,
> Chandigarh-160 022
> (Ph): +91 172 606664
> Mobile 9815228132
> sukhjits@emmtel.com
> http://www.emmtel.com
>
> ----- Original Message -----
> From: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>
> To: "Sukhjit Singh" <sukhjits@emmtel.com>; "Samuel Abreu de Paula"
> <mlists@dnadigital.com.br>; <squid-users@squid-cache.org>
> Sent: Wednesday, June 04, 2003 12:59 PM
> Subject: Re: [squid-users] one question+vmstat+squid
>
>
> > according to your vmstat output it seems that your memory is good.
because
> > your system not using swap. what about top output....
> >
> > cat /proc/meminfo
> >
> > --
> >
> > Best Regs,
> > Masood Ahmad Shah
> > System Administrator
> >
> > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
> > | * * * * * * * * * * * * * * * * * * * * * * * *
> > | Fibre Net (Pvt) Ltd. Lahore, Pakistan
> > | Tel: +92-42-6677024
> > | Mobile: +92-300-4277367
> > | http://www.fibre.net.pk
> > | * * * * * * * * * * * * * * * * * * * * * * * *
> > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
> > Unix is very simple, but it takes a genius to understand the simplicity.
> > (Dennis Ritchie)
> > "All I want is a few minutes alone with the source code for the universe
> and
> > a quick recompile."
> >
> >
> > ----- Original Message -----
> > From: "Sukhjit Singh" <sukhjits@emmtel.com>
> > To: "Samuel Abreu de Paula" <mlists@dnadigital.com.br>;
> > <squid-users@squid-cache.org>
> > Sent: Wednesday, June 04, 2003 7:28 AM
> > Subject: [squid-users] one question+vmstat+squid
> >
> >
> > > Dear all Squid Gurus,
> > >
> > > These are the stats of the vmstat of my squid cache
> > >
> > > procs memory swap io system
> > > cpu
> > > r b w swpd free buff cache si so bi bo in cs
us
> > sy
> > > id
> > > 0 0 0 0 4520 101988 329928 0 0 5 41 244 56
4
> > 9
> > > 87
> > >
> > >
> > > kindly tell me if am falling short of memory.
> > >
> > >
> > >
> > > Regards
> > >
> > > Sukhjit Singh
> > > Network Administrator
> > > Emmsons Infotech Ltd.
> > > SCO 13-14-15, Sec 34A,
> > > Chandigarh-160 022
> > > (Ph): +91 172 606664
> > > Mobile 9815228132
> > > sukhjits@emmtel.com
> > > http://www.emmtel.com
> > >
> > > ----- Original Message -----
> > > From: "Samuel Abreu de Paula" <mlists@dnadigital.com.br>
> > > To: <squid-users@squid-cache.org>
> > > Sent: Tuesday, June 03, 2003 10:09 PM
> > > Subject: [squid-users] Hude store.log file!
> > >
> > >
> > > > Hi ppl...
> > > > I get a squid running, and it stops cos lack of space in disk...
> > > > And checking the logs, the file store.log have 1.1G, ok, i move that
> > file
> > > and start squid again, squid is up...
> > > > But when i start squid, that file start growing and goes to 149M
> > > incredibly fast, then the speed is more slow, but still growing...
> > > > Checking the squid.conf, where it's to configure that file, says
that
> > > could let the parameter as none to disable it... It's ok disable??? Or
> > > anyone has a good argument to let that file ok?
> > > >
> > > > Samuel Abreu
> > > >
> > >
> > >
> >
> >
>
>
Received on Wed Jun 04 2003 - 22:38:31 MDT