Re: [squid-users] snmp+kernel 2.4.19

how you are running snmp
what
ps auwx|grep snmp display
netstat -an|grep 161 ??
if you can not find 161 in listioning port then no need to run snmpwalk
first try to run snmpd process then it will work.

Best Regs,
Masood Ahmad Shah
System Administrator

^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
| * * * * * * * * * * * * * * * * * * * * * * * *
| Fibre Net (Pvt) Ltd. Lahore, Pakistan
| Tel: +92-42-6677024
| Mobile: +92-300-4277367
| http://www.fibre.net.pk
| * * * * * * * * * * * * * * * * * * * * * * * *
^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^

----- Original Message -----
From: "Sukhjit Singh" <sukhjits@emmtel.com>
To: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>
Cc: "'squid'" <squid-users@squid-cache.org>
Sent: Wednesday, April 30, 2003 5:26 PM
Subject: Re: [squid-users] snmp+kernel 2.4.19

| I have redhat linux 8.0 the original kernel was 2.4.18-14 and i upgraded
it
| to 2.4.19 for squid+wccp, i configured squid with --enable-snmp and
compiled
| the snmpd pacakge also on the machine but the snmpwalk was giving
error.what
| to do ??
|
|
|
|
|
| Regards
|
| Sukhjit Singh
| Network Administrator
| Emmsons Infotech Ltd.
| SCO 13-14-15, Sec 34A,
| Chandigarh-160 022
| (Ph): +91 172 606664
| Mobile 9815228132
| sukhjits@emmtel.com
| http://www.emmtel.com
|
| ----- Original Message -----
| From: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>
| To: "Sukhjit Singh" <sukhjits@emmtel.com>; "squid list"
| <squid-users@squid-cache.org>
| Sent: Wednesday, April 30, 2003 5:25 PM
| Subject: Re: [squid-users] snmp+kernel 2.4.19
|
|
| > For graphs you will have to run snmp. After that you can use MRTG +
| > RRDTOOLS...
| >
| > I will suggest try to compile snmp from source and check it out. Can u
| tell
| > me about your Linux version?
| >
| > I mean to say, is it Red Hat Linux. If yes then what was the default
| kernel?
| >
| > Once upon a time I compile kernel 2.5.x and I was not able to run ppp
| daemon
| > after upgrading my ppp daemon with new one. It was working blah blah :)
| >
| >
| > Best Regs,
| > Masood Ahmad Shah
| > System Administrator
| >
| > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
| > | * * * * * * * * * * * * * * * * * * * * * * * *
| > | Fibre Net (Pvt) Ltd. Lahore, Pakistan
| > | Tel: +92-42-6677024
| > | Mobile: +92-300-4277367
| > | http://www.fibre.net.pk
| > | * * * * * * * * * * * * * * * * * * * * * * * *
| > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
| >
| > ----- Original Message -----
| > From: "Sukhjit Singh" <sukhjits@emmtel.com>
| > To: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>; "squid list"
| > <squid-users@squid-cache.org>
| > Cc: "'squid'" <squid-users@squid-cache.org>
| > Sent: Wednesday, April 30, 2003 4:50 PM
| > Subject: Re: [squid-users] snmp+kernel 2.4.19
| >
| >
| > | You are right but i need to have some graphs and i am not getting any
| > decent
| > | tool for that.
| > |
| > |
| > |
| > |
| > |
| > | Regards
| > |
| > | Sukhjit Singh
| > | Network Administrator
| > | Emmsons Infotech Ltd.
| > | SCO 13-14-15, Sec 34A,
| > | Chandigarh-160 022
| > | (Ph): +91 172 606664
| > | Mobile 9815228132
| > | sukhjits@emmtel.com
| > | http://www.emmtel.com
| > |
| > | ----- Original Message -----
| > | From: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>
| > | To: "Sukhjit Singh" <sukhjits@emmtel.com>; "squid list"
| > | <squid-users@squid-cache.org>
| > | Sent: Wednesday, April 30, 2003 5:15 PM
| > | Subject: Re: [squid-users] snmp+kernel 2.4.19
| > |
| > |
| > | > please cc to squid mailing list ...
| > | > cachemgr.cgi is very good tool for monitoring. you can find lot of
| squid
| > | > monitoring tools visit please
| > | > http://www.squid-cache.org/Scripts/
| > | > if your snmpd process not running then c your logs and also check
| > | snmpd.conf
| > | > problem can be in snmpd.conf.
| > | >
| > | >
| > | >
| > | > Best Regs,
| > | > Masood Ahmad Shah
| > | > System Administrator
| > | >
| > | > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
| > | > | * * * * * * * * * * * * * * * * * * * * * * * *
| > | > | Fibre Net (Pvt) Ltd. Lahore, Pakistan
| > | > | Tel: +92-42-6677024
| > | > | Mobile: +92-300-4277367
| > | > | http://www.fibre.net.pk
| > | > | * * * * * * * * * * * * * * * * * * * * * * * *
| > | > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
| > | >
| > | > ----- Original Message -----
| > | > From: "Sukhjit Singh" <sukhjits@emmtel.com>
| > | > To: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>
| > | > Sent: Wednesday, April 30, 2003 4:38 PM
| > | > Subject: Re: [squid-users] snmp+kernel 2.4.19
| > | >
| > | >
| > | > | Yes i did that , but the snmpd package is also not working on the
| > system
| > | > ,so
| > | > | i thought it might be the problem of the kernel.Can you suggest me
| > | > anything
| > | > | for monitoring squid , it would be a great help cause i am facing
a
| > lot
| > | of
| > | > | problem with the monitoring of the squid.
| > | > |
| > | > |
| > | > |
| > | > |
| > | > | Regards
| > | > |
| > | > | Sukhjit Singh
| > | > | Network Administrator
| > | > | Emmsons Infotech Ltd.
| > | > | SCO 13-14-15, Sec 34A,
| > | > | Chandigarh-160 022
| > | > | (Ph): +91 172 606664
| > | > | Mobile 9815228132
| > | > | sukhjits@emmtel.com
| > | > | http://www.emmtel.com
| > | > |
| > | > | ----- Original Message -----
| > | > | From: "Ahmad Masood Shah" <masood@ipsec.fibre.net.pk>
| > | > | To: "Sukhjit Singh" <sukhjits@emmtel.com>; "squid list"
| > | > | <squid-users@squid-cache.org>
| > | > | Sent: Wednesday, April 30, 2003 5:00 PM
| > | > | Subject: Re: [squid-users] snmp+kernel 2.4.19
| > | > |
| > | > |
| > | > | > I have not seen yet any option in Kernel regarding SNMP. SNMP is
a
| > | part
| > | > of
| > | > | > TCP/IP protocol like ftp,http,telnet, etc. If kernel display
| option
| > | > every
| > | > | > protocol regarding TCP/IP childs then I think kernel will become
| > | TCP/IP
| > | > | not
| > | > | > more than that :) .
| > | > | > Try to check your Squid.
| > | > | > have u compile squid with --enable-snmp support.
| > | > | >
| > | > | > Best Regs,
| > | > | > Masood Ahmad Shah
| > | > | > System Administrator
| > | > | >
| > | > | > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
| > | > | > | * * * * * * * * * * * * * * * * * * * * * * * *
| > | > | > | Fibre Net (Pvt) Ltd. Lahore, Pakistan
| > | > | > | Tel: +92-42-6677024
| > | > | > | Mobile: +92-300-4277367
| > | > | > | http://www.fibre.net.pk
| > | > | > | * * * * * * * * * * * * * * * * * * * * * * * *
| > | > | > ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
| > | > | >
| > | > | > ----- Original Message -----
| > | > | > From: "Sukhjit Singh" <sukhjits@emmtel.com>
| > | > | > To: "Henrik Nordstrom" <hno@squid-cache.org>; "Boris Mutina"
| > | > | > <bmutin@tatratimber.sk>
| > | > | > Cc: <squid-users@squid-cache.org>
| > | > | > Sent: Wednesday, April 30, 2003 4:24 PM
| > | > | > Subject: [squid-users] snmp+kernel 2.4.19
| > | > | >
| > | > | >
| > | > | > | Dear all,
| > | > | > |
| > | > | > | am facing an acute problem, i have complied squid+wccp on
linux
| > | kernel
| > | > | > | 2.4.19 but my snmpd is not working ...can any one tell me what
| all
| > | is
| > | > | > | required for snmp while compiling the kernle.
| > | > | > |
| > | > | > | It would be a great help.
| > | > | > |
| > | > | > |
| > | > | > |
| > | > | > |
| > | > | > |
| > | > | > | Regards
| > | > | > |
| > | > | > | Sukhjit Singh
| > | > | > | Network Administrator
| > | > | > | Emmsons Infotech Ltd.
| > | > | > | SCO 13-14-15, Sec 34A,
| > | > | > | Chandigarh-160 022
| > | > | > | (Ph): +91 172 606664
| > | > | > | Mobile 9815228132
| > | > | > | sukhjits@emmtel.com
| > | > | > | http://www.emmtel.com
| > | > | > |
| > | > | > | ----- Original Message -----
| > | > | > | From: "Henrik Nordstrom" <hno@squid-cache.org>
| > | > | > | To: "Boris Mutina" <bmutin@tatratimber.sk>
| > | > | > | Cc: <squid-users@squid-cache.org>
| > | > | > | Sent: Wednesday, April 30, 2003 4:43 PM
| > | > | > | Subject: Re: [squid-users] Squid authentification in workgroup
| > | > | > |
| > | > | > |
| > | > | > | > ons 2003-04-30 klockan 10.54 skrev Boris Mutina:
| > | > | > | >
| > | > | > | > > know somebody any simple authentification which can be
used
| in
| > | > | > | workgroup?
| > | > | > | >
| > | > | > | > What you mean by "simple authentication" and "workgroup"?
| > | > | > | >
| > | > | > | >
| > | > | > | > The easiest authentication method to configure in Squid is
| > | probably
| > | > | > | > basic HTTP authentication with the NCSA password file
helper.
| > | > | > | >
| > | > | > | > Regards
| > | > | > | > Henrik
| > | > | > | >
| > | > | > | >
| > | > | > | > --
| > | > | > | > Donations welcome if you consider my Free Squid support
| helpful.
| > | > | > | > https://www.paypal.com/xclick/business=hno%40squid-cache.org
| > | > | > | >
| > | > | > | > Please consult the Squid FAQ and other available
documentation
| > | > before
| > | > | > | > asking Squid questions, and use the squid-users mailing-list
| > when
| > | no
| > | > | > | > answer can be found. Private support questions is only
| answered
| > | > | > | > for a fee or as part of a commercial Squid support contract.
| > | > | > | >
| > | > | > | > If you need commercial Squid support or cost effective Squid
| and
| > | > | > | > firewall appliances please refer to MARA Systems AB, Sweden
| > | > | > | > http://www.marasystems.com/, info@marasystems.com
| > | > | > | >
| > | > | > | >
| > | > | > |
| > | > | > |
| > | > | >
| > | > | >
| > | > |
| > | > |
| > | >
| > | >
| > |
| > |
| >
| >
|
|
Received on Wed Apr 30 2003 - 06:28:16 MDT