RE: [squid-users] Enabling SIBLING causes TIMEOUT_DIRECT.

I have quite a few ICP queries logged, with UDP hits and misses.

I have tried looking for a patern to the TIMEOUT_DIRECT's but have been
unable to find any. All my clients pages are being retrieved, so I don't
know if it is just a cosmetic issue.

Regards
Rabie

-----Original Message-----
From: Henrik Nordstrom [mailto:hno@squid-cache.org]
Sent: 08 April 2003 12:26
To: Rabie van der Merwe
Cc: 'squid-users@squid-cache.org'
Subject: Re: [squid-users] Enabling SIBLING causes TIMEOUT_DIRECT.

Do you have any ICP queries logged? If not there is probably something
blocking the ICP packets from reaching the other Squid..

And does your icp_access allow for ICP queries?

Regards
Henrik

tis 2003-04-08 klockan 09.47 skrev Rabie van der Merwe:
> I seem to be stuck here, no-one on the list seems to be able to help me.
> Is anyone using siblings successfully?
>
> Regards
> Rabie
>
> -----Original Message-----
> From: Rabie van der Merwe [mailto:Rvdmerwe@mhg.co.za]
> Sent: 07 April 2003 10:18
> To: 'squid-users@squid-cache.org'
> Subject: RE: [squid-users] Enabling SIBLING causes TIMEOUT_DIRECT.
>
>
> Has anyone everseen something like this?
> Can I enable some form of debugging to try and track it, so far no-one
> seems to be able to help me, and I don't want to put this into production
> if there is a problem with my config, or Squid itself.
>
> Regrads
> Rabie van der Merwe
>
> -----Original Message-----
> From: Rabie van der Merwe [mailto:Rvdmerwe@mhg.co.za]
> Sent: 05 April 2003 17:29
> To: 'squid-users@squid-cache.org'
> Subject: [squid-users] Enabling SIBLING causes TIMEOUT_DIRECT.
>
>
> I have 2 squid gateways for the whole org running Squid 2.5 Stable 1
> When I enble :
>
> cache_peer sibling02.dmz sibling 80 3130 proxy-only
>
> On sibling01 (I have changed the ACL's on both servers to allow access)
> And:
>
> cache_peer sibling01.dmz sibling 80 3130 proxy-only
>
> On sibling02.
>
> When I reconfigure squid, the sibling is seen in the cache.log, but
> I start getting an excessive ammounts of TIMEOUT_DIRECT's in the access
> logs on both server, and very little SIBILING entries.
>
> Both servers are on the same lan segment, and some of the
> TIMEOUT_DIRECT's
> are to web servers that are on that same segment.
>
> As soon as I remove the sibling entries, then TIMEOUT_DIRECT stops.
>
> Any help would be appreceated.
>
> Regards
> Rabie van der Merwe

-- 
Henrik Nordstrom <hno@squid-cache.org>
MARA Systems AB, Sweden