Could you send a sample squid.conf file and also if you are using a redirector, the config file for the redirector also.
-----Original Message-----
From: Sander Winkel [mailto:s.winkel@roc-teraa.nl]
Sent: Thu 3/13/2003 4:39 AM
To: Lieven Marchand
Cc: squid-users@squid-cache.org
Subject: Re: [squid-users] How to do? authentication and ip-range
Thanks, it works!
Sander Winkel
----- Original Message -----
From: "Lieven Marchand" <lieven.marchand@just.fgov.be>
To: "Sander Winkel" <s.winkel@roc-teraa.nl>
Cc: <squid-users@squid-cache.org>
Sent: Thursday, March 13, 2003 10:02 AM
Subject: Re: [squid-users] How to do? authentication and ip-range
> "Sander Winkel" <s.winkel@roc-teraa.nl> writes:
>
> > I want to give only access to computers from an specified ip-range and
the
> > users at that ip-range must be validated with radius authentication.
> > The radius authentication works well, but I don't know how to define
that
> > only the specified IP-range have access to the server.
> > Oh yes, I know that it could as specified below:
> >
> > acl clients src 192.168.0.0/255.255.255.0
> > http_access allow clients
> >
> > But when I put this before:
> >
> > http_access allow password
> >
> > All the users within that range have access to the cache without
> > authentication.
> >
> > I think that's not so difficult to get this work, but I don't see the
> > solution at the moment.
> > I hope you can help me.
>
> acl's can be combined so you do
>
> http_access allow clients password
>
> --
> There is only one war, and it's not the rich against the poor,
> the blacks against the whites, the Federation against the Borg,
> or the Democrats versus the Republicans. It's those of us who
> aren't complete idiots against those of us who are.
Received on Thu Mar 13 2003 - 03:43:03 MST
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:14:03 MST