Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

Dear Mr Masood

please check the last mail.
i have given all the reports

thanks
hare
----- Original Message -----
From: "MASOOD AHMAD" <masoodnt10@yahoo.com>
To: "hare ram" <hareram@sol.net.in>
Cc: <squid-users@squid-cache.org>
Sent: Saturday, January 11, 2003 12:22 PM
Subject: Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

> Dear Hare,
>
> is your transparent proxy working fine try to check
> that I think then problem in your cache which is not
> redirecint port 80 packet.
>
> send us detail from router
>
> show ip wccp webcache detail
>
> best regards,
> Masood Ahmad Shah
> System Administrator
> Fibre Net
>
> --- hare ram <hareram@sol.net.in> wrote:
> > Hi Farrukh
> >
> > you have to divert the traffic from interface
> > WCCP does not do this automatic traffic diversion
> > we need to mention what traffic to ( in/out) do .
> >
> > any way this is for information only
> >
> > thanks
> > hare
> > ----- Original Message -----
> > From: "Farrukh Mahmood"
> > <farrukh_mahmood@eworld.net.pk>
> > To: "MASOOD AHMAD" <masoodnt10@yahoo.com>;
> > <squid-users@squid-cache.org>
> > Sent: Friday, January 10, 2003 7:03 PM
> > Subject: Re: [squid-users] Problem with SQUID+ WCCP
> > v2 + Cisco Router
> >
> >
> > > hi
> > >
> > > if its wccp why should we have to redirect it from
> > router cause wccp
> > > itself say that "i m here" and broadcast this
> > message to network when
> > > he got reply from router from network its shown in
> > router by this
> > > command "sh ip wccp web cache detail" we never do
> > any thing for
> > > redirection on router if wccp is running , and
> > according to my
> > > knowledge there are no configuration for squid on
> > wccp2 but i works
> > > fine on wccp1 and u can find this configuration on
> > squid site.
> > >
> > >
> > > Regards
> > > Farrukh Mahmood
> > >
> > > ----- Original Message -----
> > > From: MASOOD AHMAD <masoodnt10@yahoo.com>
> > > Date: Friday, January 10, 2003 5:53 pm
> > > Subject: Re: [squid-users] Problem with SQUID+
> > WCCP v2 + Cisco Router
> > >
> > > > your wccp seems to be working fine try to put
> > redirect
> > > > out on router external interface it can be
> > serail
> > > > instead fast ethernet 0/0 it will work...
> > > >
> > > > Best Regards,
> > > > Masood Ahmad Shah
> > > > System Administrator
> > > > Fibre Net
> > > >
> > > > --- hare ram <hareram@sol.net.in> wrote:
> > > > > any coments on this problem
> > > > >
> > > > > thanks
> > > > > hare
> > > > > ----- Original Message -----
> > > > > From: "hare ram" <hareram@sol.net.in>
> > > > > To: <squid-users@squid-cache.org>
> > > > > Sent: Friday, January 10, 2003 2:03 PM
> > > > > Subject: [squid-users] Problem with SQUID+
> > WCCP v2 +
> > > > > Cisco Router
> > > > >
> > > > >
> > > > > > Hi all
> > > > > >
> > > > > > i am trying to deploy squid 2.5 version +
> > WCCP v2
> > > > > + cisco Router
> > > > > >
> > > > > > but i could not able to success
> > > > > >
> > > > > > my proxy running with transparent, tested
> > working
> > > > > fine
> > > > > > but when i divert the traffic from cisco
> > router
> > > > > using wccp, i could not =
> > > > > > able to see any traffic going via my cache
> > server
> > > > > >
> > > > > > but iam able to see lot of redirect packets
> > from
> > > > > cisco
> > > > > >
> > > > > > any suggestion will be appriciated
> > > > > >
> > > > > > ###########my setup
> > > > > >
> > > > > > Redhat 8.0 with 2.4.18-19.8 kernal
> > > > > > patched kernal with iptables 1.2.7 with
> > Visolve
> > > > > WCCP v2 Patch to kernal
> > > > > > patched latest squid ver 2.5 also with the
> > > > > recomended patch give from =
> > > > > > this URL
> > > > > >
> > > > >
> > > >
> >
> http://squid.visolve.com/developments/wccpv2_install.htm
> > > > > >
> > > > > > ###########My cisco config Looks Like this
> > > > > >
> > > > > > !
> > > > > > ip subnet-zero
> > > > > > no ip source-route
> > > > > > ip wccp web-cache
> > > > > > !
> > > > > > !
> > > > > > ip name-server z.z.z.z
> > > > > > !
> > > > > > no ip bootp server
> > > > > > call rsvp-sync
> > > > > > !
> > > > > > !
> > > > > > !
> > > > > > !
> > > > > > !
> > > > > > interface FastEthernet0/0
> > > > > > ip wccp webcache redirect out
> > > > > > ip address y.y.y.y y.y.y.y
> > > > > >
> > > > > >
> > > > > >
> > > > > > ###########GATEWAY#show ip wccp web-cache
> > detail
> > > > > > WCCP Cache-Engine information:
> > > > > > IP Address: x.x.x.x ( ip
> > > > > address of cache Server)
> > > > > > Protocol Version: 2.0
> > > > > > State: Usable
> > > > > > Initial Hash Info:
> > > > > 00000000000000000000000000000000
> > > > > >
> > > > > 00000000000000000000000000000000
> > > > > > Assigned Hash Info:
> > > > > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > > > > > =
> > > > > > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > > > > > Hash Allotment: 256 (100.00%)
> > > > > > Packets Redirected: 1048
> > > > > > Connect Time: 00:24:23
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > ########My squid.conf looks like this
> > > > > >
> > > > > >
> > > > > > #######WCCP config with Squid
> > > > > >
> > > > > > wccp_router y.y.y.y
> > > > > > wccp2_router y.y.y.y
> > > > > >
> > > > > >
> > > > > > ###########My cache.log Looks Like this
> > > > > >
> > > > > >
> > > > > > 2003/01/10 19:36:23| Accepting HTTP
> > connections at
> > > > > 0.0.0.0, port 3129, =
> > > > > > FD 11.
> > > > > > 2003/01/10 19:36:23| Accepting ICP messages
> > at
> > > > > 0.0.0.0, port 3130, FD =
> > > > > > 12.
> > > > > > 2003/01/10 19:36:23| Accepting SNMP messages
> > on
> > > > > port 3401, FD 13.
> > > > > > 2003/01/10 19:36:23| Accepting WCCP messages
> > on
> > > > > port 2048, FD 14.
> > > > > > 2003/01/10 19:36:23| Accepting WCCP v2
> > messages on
> > > > > port 2048, FD 15.
> > > > > > 2003/01/10 19:32:10| Incoming
> > WCCP2_I_SEE_YOU
> > > > > received id =3D 868.
> > > > > > 2003/01/10 19:32:10| Incoming
> > WCCP2_I_SEE_YOU
> > > > > member change =3D 17 =
> > > > > > tmp=3D17.
> > > > > > 2003/01/10 19:32:20| Incoming WCCP v2
> > I_SEE_YOU
> > > > > length 132.
> > > > > > 2003/01/10 19:32:20| Incoming
> > WCCP2_I_SEE_YOU
> > > > > received id =3D 869.
> > > > > > 2003/01/10 19:32:20| Incoming
> > WCCP2_I_SEE_YOU
> > > > > member change =3D 17 =
> > > > > > tmp=3D17.
> > > > > > 2003/01/10 19:32:31| Incoming WCCP v2
> > I_SEE_YOU
> >
> === message truncated ===
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
>
Received on Fri Jan 10 2003 - 23:57:25 MST