We tried what you suggested, but when the system has a 2 Gb. access.log file
it just doesn't add anything to the log, without prompting any error at
cache.log.
Must be something else...
----- Original Message -----
From: "Henrik Nordstrom" <hno@marasystems.com>
To: "Andres Biscione" <ab@aper.net>; <squid-users@squid-cache.org>
Sent: Sunday, December 16, 2001 11:38 PM
Subject: Re: [squid-users] Fatal error
> Looks like you have a log file reaching the 2GB limit of standard
filesystem
> interfaces on 32 bit processors.. Most certainly it is the access.log file
> which has grown larger than your CPU architecture can handle cleanly.
>
> Recommendation: set up log rotation to have your logs periodically rotated
> and cleaned to keep them in maintainable sizes.
>
> Workaround: Manually rotate access.log to allow Squid to start.
>
> Regards
> Henrik Nordström
>
>
> On Monday 17 December 2001 02.55, Andres Biscione wrote:
> > Hello-
> >
> > We've been running Squid for a month, approximately, and we recently had
> > some unprecedented problems. We don't find their cause, so maybe someone
> > can help.
> >
> > Below is the cache.log relevant part, from the first error and on. We
> > suppose the first error to be the relevant one, and the other being
caused
> > by it, but we're not sure.
> >
> > Any enlightening will be enormously appreciated.
> >
> > 2001/12/15 09:28:22| diskHandleWrite: FD 2: disk write error: (27) File
too
> > large
> > 2001/12/15 09:28:22| storeDirWriteCleanLogs: Starting...
> > 2001/12/15 09:28:22| WARNING: Closing open FD 17
> > 2001/12/15 09:28:22| Finished. Wrote 16357 entries.
> > 2001/12/15 09:28:22| Took 0.0 seconds (922196.5 entries/sec).
> > FATAL: Write failure -- check your disk space and cache.log
>
> --
> MARA Systems AB
> Giving you basic free Squid support
> Priority support or Squid enhancements available on request
Received on Sun Dec 16 2001 - 21:45:12 MST
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:05:22 MST