[squid-users] Ответ: [squid-users] Problem of limitation of a connection number

client_db feature enabled, but if i make as described in squid FAQ, i cannot
at all connect to squid.

>Hi,
>
>On Tue, 10 Jul 2001, Bangard Aleksandr wrote:
>
>> Hello!
>>
>> I try limit number of connection. In squid.conf i write:
>> acl baf src 192.168.62.126/255.255.255.255
>>
>> acl lmt maxconn 3
>> http_access deny lmt baf
>
>Have a look at this and see if there's anything useful. Note the
>requirement for "client_db". From the FAQ:
>
>> 10.22 Can I limit the number of connections from a client?
>>
>> Yes, use the maxconn ACL type in conjunction with http_access deny. For
>> example:
>>
>> acl losers src 1.2.3.0/24
>> acl 5CONN maxconn 5
>> http_access deny 5CONN losers
>>
>> Given the above configuration, when a client whose source IP address is
in
>> the 1.2.3.0/24 subnet tries to establish 6 or more connections at once,
>> Squid returns an error page. Unless you use the deny_info feature, the
>> error message will just say ``access denied.''
>>
>> The maxconn ACL requires the client_db feature. If you've disabled
>> client_db (for example with client_db off) then maxconn ALCs will not
>> work.
>>
>> Note, the maxconn ACL type is kind of tricky because it uses less-than
>> comparison. The ACL is a match when the number of established connections
>> is greater than the value you specify. Because of that, you don't want to
>> use the maxconn ACL with http_access allow.
>>
>> Also note that you could use maxconn in conjunction with a user type
>> (ident, proxy_auth), rather than an IP address type.
>
>Colin
>
>
Received on Wed Jul 11 2001 - 00:27:35 MDT