Re: [squid-users] Telnet Sessions Disconnect

Hi

Sorry forgot to mention that its not the squid machine, the clients connect to via telnet, they also connect to other machines. Yes telnet port is enabled. Thus this entry will only help if they telnet to squid machine only.

Charanbeer.
  ----- Original Message -----
  From: Ilker Gokhan
  To: 'Charanbeer'
  Sent: Friday, May 25, 2001 2:31 PM
  Subject: YNT: [squid-users] Telnet Sessions Disconnect

  Try :
  /sbin/ipchains -A input -p tcp -s 191.168.1.0/24 telnet -j ACCEPT
   
  But you have to enable telnet port from /etc/services...
   
  Best regards,
  Ilker G.
    -----Özgün Ileti-----
    Kimden: Charanbeer [mailto:charanbeer.s@net4india.net]
    Tarih: Friday, May 25, 2001 11:52 AM
    Kime: Squid
    Konu: Re: [squid-users] Telnet Sessions Disconnect

    This is my ipchains file which executes at the startup Do I need to add anything in to it to enable it:

    /sbin/ipchains -A input -p tcp -s 192.168.1.0/24 -d 0/0 80 -j REDIRECT 8080
    /sbin/ifconfig eth0:0 192.168.1.1
    /sbin/ipchains -A forward -s 192.168.1.0/24 -j MASQ
    /sbin/ipchains -A input -p tcp -s 192.168.1.0/24 ftp -j ACCEPT
    /sbin/ipchains -A input -p tcp -s 191.168.1.0/24 ftp-data -j ACCEPT
    /sbin/ipchains -A output -p tcp -s 192.168.1.0/24 ftp-data -j ACCEPT
    /sbin/insmod ip_masq_ftp

    Charanbeer.
      ----- Original Message -----
      From: Löger, Stefan
      To: 'Charanbeer' ; Squid
      Sent: Friday, May 25, 2001 1:07 PM
      Subject: AW: [squid-users] Telnet Sessions Disconnect

      Squid is NOT a Telnet Proxy, only Http, Ftp und SSL tunneling!!
        -----Ursprüngliche Nachricht-----
        Von: Charanbeer [mailto:charanbeer.s@net4india.net]
        Gesendet: Freitag, 25. Mai 2001 09:35
        An: Squid
        Betreff: [squid-users] Telnet Sessions Disconnect

        Hi All

        I am running Squid 2.3 on Red Hat 6.1 with the deafult squid.conf serving 40odd win95/98 clients.My squid machine is PIII 550 MHz
        with 10gb HDD and 128MB RAM (256MB of swap space) These clients use telnet a lot and their telnet sessions tend to disconnect after every few minutes whereas if they go directly(i.e. without using proxy) they dont face any such problem.

        Is there anything in squid.conf which defines the idle time after which the client's telnet session is disconnected. Any suggestions on this would be a great help.

        Thanks in advance
        Charanbeer.

  Bu e-postada bulunan tüm fikir ve görüsler ve ekindeki dosyalar sadece adres sahib(ler)ine ait olup, Sümerbank A.S hiç bir sekilde sorumlu tutulamaz.

  The information contained in this E-Mail and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed and do not reflect those of Sumerbank A.S.
Received on Fri May 25 2001 - 03:13:13 MDT