Re: [SQU] Squid & Apache

Infact I never used any auth with squid so I will not be able to help you ,
the only guide line I can give you is when you define following parameters
consult some squid FAQ or some Guru. May be Duane Wessels.

http://www.squid-cache.org/Doc/FAQ/FAQ-23.html

# TAG: httpd_accel_host
# TAG: httpd_accel_port
# If you want to run Squid as an httpd accelerator, define the
# host name and port number where the real HTTP server is.
#
# If you want virtual host support then specify the hostname
# as "virtual".
#
# NOTE: enabling httpd_accel_host disables proxy-caching and
# ICP. If you want these features enabled also, then set
# the 'httpd_accel_with_proxy' option.
#
#httpd_accel_host hostname
#httpd_accel_port port

Ahsan Saleem Khan
Sr. System Admin
OneNet (Sun Communication Pvt)
http://www.one.net.pk
Cisco Certified Network Associate (2.0)
http://www.brainbench.com/transcript.jsp?pid=525156
----- Original Message -----
From: "Johnny Lee" <johnny@pcinterlink.com>
To: "Ahsan Khan" <ahsank@one.net.pk>
Sent: Wednesday, February 07, 2001 2:28 AM
Subject: RE: [SQU] Squid & Apache

> I am using NCSA auth.. and if i set the proxy config manually in the
browser
> it works fine.. but if I set it as transparent it doesnt..
>
> Johnny
>
> -----Original Message-----
> From: Ahsan Khan [mailto:ahsank@one.net.pk]
> Sent: Tuesday, February 06, 2001 1:13 PM
> To: Johnny Lee
> Subject: Re: [SQU] Squid & Apache
>
>
> can you explain that login passwd feature, are you using squid NTML AUTH
> feature or you are talking about apache .htaccess file.??
>
>
> Ahsan Saleem Khan
> Sr. System Admin
> OneNet (Sun Communication Pvt)
> http://www.one.net.pk
> Cisco Certified Network Associate (2.0)
> http://www.brainbench.com/transcript.jsp?pid=525156
> ----- Original Message -----
> From: "Johnny Lee" <johnny@pcinterlink.com>
> To: "Ahsan Khan" <ahsank@one.net.pk>
> Sent: Wednesday, February 07, 2001 2:10 AM
> Subject: RE: [SQU] Squid & Apache
>
>
> > Yea that's not my problem... I already have all my forwarding setup. My
> > problem is that when you use transparent mode for squid I can't get it
to
> > ask for a login/pass like it would if i set it in the browser as a
> proxy....
> >
> > Johnny
> >
> > -----Original Message-----
> > From: Ahsan Khan [mailto:ahsank@one.net.pk]
> > Sent: Tuesday, February 06, 2001 1:02 PM
> > To: Johnny Lee
> > Cc: Squid Mailing List (Squid-users)
> > Subject: Re: [SQU] Squid & Apache
> >
> >
> > then apply ..
> >
> > ipfw add 30 allow tcp from your.machine.ip.address to any
> > ipfw add 40 fwd 127.0.0.1,3128 tcp from any to any 80
> > ipfw add 50 fwd 127.0.0.1,3128 tcp from any to any 8080
> >
> >
> > I am running squid in Transparent mode with apache. on my two FreeBSD
> > Systems.
> >
> > NOTE: You have to configure your squid in Transparent Mode, If you are
> still
> > on the road go to FAQ section on squid site.
> >
> >
> >
> >
> > Ahsan Saleem Khan
> > Sr. System Admin
> > OneNet (Sun Communication Pvt)
> > http://www.one.net.pk
> > Cisco Certified Network Associate (2.0)
> > http://www.brainbench.com/transcript.jsp?pid=525156
> >
> > ----- Original Message -----
> > From: "Johnny Lee" <johnny@pcinterlink.com>
> > To: "Ahsan Khan" <ahsank@one.net.pk>
> > Sent: Wednesday, February 07, 2001 1:53 AM
> > Subject: RE: [SQU] Squid & Apache
> >
> >
> > > I am using freeBSD
> > >
> > > -----Original Message-----
> > > From: Ahsan Khan [mailto:ahsank@one.net.pk]
> > > Sent: Tuesday, February 06, 2001 12:34 PM
> > > To: Johnny Lee; Squid ML
> > > Subject: Re: [SQU] Squid & Apache
> > >
> > >
> > > Use FreeBSD.
> > >
> > >
> > > Ahsan Saleem Khan
> > > Sr. System Admin
> > > OneNet (Sun Communication Pvt)
> > > http://www.one.net.pk
> > > Cisco Certified Network Associate (2.0)
> > > http://www.brainbench.com/transcript.jsp?pid=525156
> > > ----- Original Message -----
> > > From: "Johnny Lee" <johnny@pcinterlink.com>
> > > To: "Squid ML" <squid-users@ircache.net>
> > > Sent: Wednesday, February 07, 2001 12:34 AM
> > > Subject: [SQU] Squid & Apache
> > >
> > >
> > > > Anyone setup a box using both of these? I need squid to do
transparent
> > > proxy
> > > > & authentication but I would like to keep apache on port 80 also. Is
> > there
> > > > some way to do it? Thanks
> > > >
> > > > Johnny
> > > >
> > > > --
> > > > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> > > >
> > > >
> > >
> > > --
> > > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> > >
> > >
> > >
> >
> >
> >
>
>
>

--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html