Re: [SQU] How to install NTLM Authentication.

I'm also trying to install NTLM authentication. I tried using the cvs method
but port 2401 on our firewall is blocked. Is there another way to get the
files associated with NTLM authentication?

Thanks
Craig
----- Original Message -----
From: "Robert Collins" <robert.collins@itdomain.com.au>
To: "Yuri Sytema" <Yuri.S@arma.nl>; "Craig Fels" <csfels@swbell.net>
Cc: "Squid-Users" <squid-users@ircache.net>
Sent: Tuesday, October 24, 2000 4:39 PM
Subject: Re: [SQU] How to install NTLM Authentication.

> Yuri that should work.
>
> The autoconf & autoheader errors occur because squid checks the *local
> machine* for things like FD set sizes, tcp packet buffer size and no
default
> is provided - thus squid can't be compiled on one machine for use on
another
> (which autoconf and autoheader do normally allow).
>
> Rob
>
> ----- Original Message -----
> From: "Yuri Sytema" <Yuri.S@arma.nl>
> To: "Craig Fels" <csfels@swbell.net>
> Cc: "Squid-Users" <squid-users@ircache.net>
> Sent: Wednesday, October 25, 2000 1:13 AM
> Subject: RE: [SQU] How to install NTLM Authentication.
>
>
> >
> > Hi Craig
> >
> > No, I don't know what it does, but after I have started it, it comes
back
> > with the command prompt.
> > So i suppose it worked :)
> > The second line seems to download te latest development source of squid.
> >
> > Did U get another version up and running yet?
> > What do you need, like me just the fakeauth to get a username, or do u
> need
> > authentication?
> >
> > after some little adjustments smb_auth runs fine over here, but we're
not
> > using it.
> >
> >
> >
> > -----Oorspronkelijk bericht-----
> > Van: Craig Fels [mailto:csfels@swbell.net]
> > Verzonden: Tuesday, October 24, 2000 3:55 PM
> > Aan: Yuri Sytema
> > Onderwerp: Re: [SQU] How to install NTLM Authentication.
> >
> >
> > Yuri,
> >
> > I'm also trying to install NTLM for squid. I"m following the steps you
> > listed below and have a question. When you type the first cvs line to
log
> > on you press enter at the password prompt. Now what? Do I wait for
some
> > confirmation that I was logged on, or do I continue typing the next
line?
> >
> > Thanks
> > Craig
> > ----- Original Message -----
> > From: "Yuri Sytema" <Yuri.S@arma.nl>
> > To: "Robert Collins" <robert.collins@itdomain.com.au>
> > Cc: "Squid-Users" <squid-users@ircache.net>
> > Sent: Tuesday, October 24, 2000 7:11 AM
> > Subject: RE: [SQU] How to install NTLM Authentication.
> >
> >
> > > Okay, i started from scratch
> > >
> > > created a csv dir
> > > entered that dir
> > >
> > > cvs -d:pserver:anonymous@cvs.squid.sourceforge.net:/cvsroot/squid
login
> > > #(no password just enter)
> > > cvs -z3 -d:pserver:anonymous@cvs.squid.sourceforge.net:/cvsroot/squid
> > co -r
> > > ntlm squid
> > >
> > > #a squid dir was created (with content)
> > > cd squid
> > > autoconf
> > > #i get the following errors, but was told to ignore them
> > > #configure.in:915: warning: AC_TRY_RUN called without default to allow
> > > cross compiling
> > > #configure.in:1011: warning: AC_TRY_RUN called without default to
allow
> > > cross compiling
> > > #configure.in:1012: warning: AC_TRY_RUN called without default to
allow
> > > cross compiling
> > > #configure.in:1013: warning: AC_TRY_RUN called without default to
allow
> > > cross compiling
> > > #configure.in:1287: warning: AC_TRY_RUN called without default to
allow
> > > cross compiling
> > > autoheader
> > > #now I get these arrors, ignoring them assuming they have something to
> do
> > > with the previous ones
> > > #configure.in:915: warning: AC_TRY_RUN called without default to allow
> > > cross compiling
> > > #configure.in:1287: warning: AC_TRY_RUN called without default to
allow
> > > cross compiling
> > > cd icons
> > > sh ./icons.shar
> > > cd ..
> > > mkdir build
> > > cd buils
> > >
> >
>
../squid/configure --enable-ntlm-authentication --enable-ntlm-auth-modules="
> > > fakeauth" --enable-basic-authentication
> > > make
> > > #i get the follofing errors
> > > #Making all in ntlm_auth_modules...
> > > #make[1]: Entering directory `/usr/local/cvs/build/ntlm_auth_modules'
> > > #make[2]: Entering directory
> > > `/usr/local/cvs/build/ntlm_auth_modules/fakeauth'
> > >
#gcc -g -O2 -Wall -I. -I../../include -I../../../squid/include -c -o
> > > fakeauth_auth.o
> #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c
> > > #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c: In
function
> > > `ntlmGetString':
> > > #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c:123:
warning:
> > `c'
> > > might be used uninitialized in this #function
> > > #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c: In
function
> > > `main':
> > > #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c:241:
warning:
> > > implicit declaration of function `base64#_encode_bin'
> > > #../../../squid/ntlm_auth_modules/fakeauth/fakeauth_auth.c:266:
warning:
> > > implicit declaration of function `uudecode'
> > > #gcc -g fakeauth_auth.o -o
> > > fakeauth_auth -L../../lib -lmiscutil -lcrypt -lm -lresolv -lbsd -lnsl
> > > #make[2]: Leaving directory
> > > `/usr/local/cvs/build/ntlm_auth_modules/fakeauth'
> > > #make[1]: Leaving directory `/usr/local/cvs/build/ntlm_auth_modules'
> > > #[root@lproxy build]#
> > >
> > > This propably won't work, will it.?
> > >
> > >
> > > Yuri
> > > -----Oorspronkelijk bericht-----
> > > Van: Robert Collins [mailto:robert.collins@itdomain.com.au]
> > > Verzonden: Tuesday, October 24, 2000 10:48 AM
> > > Aan: Yuri Sytema; Chemolli Francesco (USI)
> > > CC: Squid-Users
> > > Onderwerp: Re: [SQU] How to install NTLM Authentication.
> > >
> > >
> > > Your configure statement is wrong. I haven't looked at why you are
> getting
> > > errors just yet ( I am reworking the code anyway (not in CVS though)).
> > >
> > > the configure parameters are --enable-ntlm-authentication
> > > and --enable-basic-authentication
> > > not --enable-ntlm-auth
> > >
> >
>
../squid/configure --enable-ntlm-auth --enable-basic-auth --enable-ntlm-auth
> > > -modules="NTLMSSP" --enable-delay-pools
> > >
> > > please try reconfiguring,
> > > Rob
> > >
> > > ----- Original Message -----
> > > From: "Yuri Sytema" <Yuri.S@arma.nl>
> > > To: "Chemolli Francesco (USI)" <ChemolliF@GruppoCredit.it>
> > > Cc: "Squid-Users" <squid-users@ircache.net>
> > > Sent: Tuesday, October 24, 2000 5:49 PM
> > > Subject: RE: [SQU] How to install NTLM Authentication.
> > >
> > >
> > > > Okay,
> > > >
> > > > ignored the following errors.
> > > >
> > > > [root@lproxy squid]# autoconf
> > > > configure.in:915: warning: AC_TRY_RUN called without default to
allow
> > > cross
> > > > compiling
> > > > configure.in:1011: warning: AC_TRY_RUN called without default to
allow
> > > cross
> > > > compiling
> > > > configure.in:1012: warning: AC_TRY_RUN called without default to
allow
> > > cross
> > > > compiling
> > > > configure.in:1013: warning: AC_TRY_RUN called without default to
allow
> > > cross
> > > > compiling
> > > > configure.in:1287: warning: AC_TRY_RUN called without default to
allow
> > > cross
> > > > compiling
> > > > [root@lproxy squid]#
> > > >
> > > > [root@lproxy squid]# autoheader
> > > > configure.in:915: warning: AC_TRY_RUN called without default to
allow
> > > cross
> > > > compiling
> > > > configure.in:1287: warning: AC_TRY_RUN called without default to
allow
> > > cross
> > > > compiling
> > > > [root@lproxy squid]#
> > > >
> > > > used
> > > >
> > >
> >
>
../squid/configure --enable-ntlm-auth --enable-basic-auth --enable-ntlm-auth
> > > > -modules="NTLMSSP" --enable-delay-pools
> > > > to configure squid
> > > > typed make and it stopped with:
> > > >
> > > > make[2]: Leaving directory `/usr/local/cvs/build/src/repl'
> > > > make[2]: Entering directory `/usr/local/cvs/build/src'
> > > > gcc -g -O2 -Wall -I. -I../include -I../../squid/include -c -o
> > > > access_log.o ../../squid/src/access_log.c
> > > > gcc -g -O2 -Wall -I. -I../include -I../../squid/include -c -o
acl.o
> > > > ../../squid/src/acl.c
> > > > ../../squid/src/acl.c: In function `aclMatchProxyAuth':
> > > > ../../squid/src/acl.c:1466: warning: unreachable code at beginning
of
> > > switch
> > > > statement
> > > > ../../squid/src/acl.c:1609: parse error before `static'
> > > > ../../squid/src/acl.c:1613: `first' undeclared (first use in this
> > > function)
> > > > ../../squid/src/acl.c:1613: (Each undeclared identifier is reported
> only
> > > > once
> > > > ../../squid/src/acl.c:1613: for each function it appears in.)
> > > > ../../squid/src/acl.c:1614: `prev' undeclared (first use in this
> > function)
> > > > ../../squid/src/acl.c:1616: warning: dereferencing `void *' pointer
> > > > ../../squid/src/acl.c:1616: request for member `i' in something not
a
> > > > structure or union
> > > > ../../squid/src/acl.c:1616: `i' undeclared (first use in this
> function)
> > > > ../../squid/src/acl.c:1620: warning: dereferencing `void *' pointer
> > > > ../../squid/src/acl.c:1620: request for member `next' in something
not
> a
> > > > structure or union
> > > > ../../squid/src/acl.c:1621: warning: dereferencing `void *' pointer
> > > > ../../squid/src/acl.c:1621: request for member `next' in something
not
> a
> > > > structure or union
> > > > ../../squid/src/acl.c:1627: warning: dereferencing `void *' pointer
> > > > ../../squid/src/acl.c:1627: request for member `next' in something
not
> a
> > > > structure or union
> > > > ../../squid/src/acl.c: In function `aclMatchAcl':
> > > > ../../squid/src/acl.c:1832: warning: implicit declaration of
function
> > > > `aclMatchInteger'
> > > > make[2]: *** [acl.o] Error 1
> > > > make[2]: Leaving directory `/usr/local/cvs/build/src'
> > > > make[1]: *** [all] Error 2
> > > > make[1]: Leaving directory `/usr/local/cvs/build/src'
> > > > make: *** [all] Error 1
> > > > [root@lproxy build]#
> > > >
> > > > something must be wrong here..
> > > >
> > > > what did I do wrong?
> > > >
> > > >
> > > > -----Oorspronkelijk bericht-----
> > > > Van: Chemolli Francesco (USI) [mailto:ChemolliF@GruppoCredit.it]
> > > > Verzonden: Tuesday, October 24, 2000 8:32 AM
> > > > Aan: 'Yuri.S@arma.nl'
> > > > Onderwerp: RE: [SQU] How to install NTLM Authentication.
> > > >
> > > >
> > > >
> > > > > Hi
> > > > >
> > > > > Installed m4 and the autoconf/autoheader tools.
> > > > >
> > > > > when running autoconf i get the following error.
> > > > > What's wrong?
> > > > >
> > > > > [root@lproxy squid]# autoconf
> > > > > configure.in:915: warning: AC_TRY_RUN called without default
> > > > > to allow cross
> > > > > compiling
> > > > > configure.in:1011: warning: AC_TRY_RUN called without default
> > > > > to allow cross
> > > > > compiling
> > > > > configure.in:1012: warning: AC_TRY_RUN called without default
> > > > > to allow cross
> > > > > compiling
> > > > > configure.in:1013: warning: AC_TRY_RUN called without default
> > > > > to allow cross
> > > > > compiling
> > > > > configure.in:1287: warning: AC_TRY_RUN called without default
> > > > > to allow cross
> > > > > compiling
> > > > > [root@lproxy squid]#
> > > >
> > > > This is normal. You can safely ignore it.
> > > >
> > > > --
> > > > /kinkie
> > > >
> > > > --
> > > > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> > > >
> > > >
> > >
> > > --
> > > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> > >
> > > --
> > > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> > >
> >
> >
> > --
> > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> >
> >
>

--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html