Re: WCCP 1.0 memory requirements on Cisco?

Thanks a lot for the help I am really now with open eyes.

With Regards
Ahsan Khan
Sr. System Admin
Internet Division (OneNet)
Sun Communication Pvt. Ltd.
Pakistan
http://www.one.net.pk

----- Original Message -----
From: "Lincoln Dale" <ltd@cisco.com>
To: "Ahsan Khan" <ahsank@one.net.pk>; <dcosby@infowest.com>;
<squid-users@ircache.net>
Sent: Sunday, May 28, 2000 2:12 AM
Subject: Re: WCCP 1.0 memory requirements on Cisco?

> At 13:27 27/05/00, Ahsan Khan wrote:
> >Is it possible that because of High Router Load [s proc (90%) ] Wccp Stop
> >talking to any of the squid Box.??
>
> perhaps - but unlikely.
>
> by default, there are heartbeat messages every 10 seconds between the
cache
> and the router --
> if 3 of them are lost, and the router subsequently sends out 3 query
> messages 1 second apart, and they too aren't answered, then the router
will
> remove the cache.
>
> >Like is have the situation
> >
> >2501 Router
> >128k Link
> >two Squid WCCP box,
>
> you should really look into why the router is at a high cpu utilisation.
> ie. what is it doing to cause the high cpu utilisation?
>
> >Some times s ip w w shows one of my cache as useable but there is no HASH
> >assignment.neither the Packet Redirection is active on that cache.
>
> it sounds like a possible bug in the wccp implementation for squid.
>
> >IOS is version 12.0.
>
> if you run IOS 12.0T (eg. 12.0(7)T), it will syslog "cache acquired" and
> "cache lost" messages when caches appear/disappear - telling you why.
>
>
> cheers,
>
> lincoln.
>
>
> --
> Lincoln Dale Content Services Business Unit
> ltd@cisco.com cisco Systems, Inc. | |
> || ||
> +1 (408) 525-1274 bldg G, 170 West Tasman |||| ||||
> +61 (3) 9659-4294 << San Jose CA 95134 ..:||||||:..:||||||:..
>
Received on Sun May 28 2000 - 18:04:18 MDT