transparent proxy Not working..

From: Nick <nick@dont-contact.us>
Date: Wed, 3 May 2000 11:33:58 -0700

    I Believe the Squid machine has been setup correctly
i added
"ipchains -I input -p tcp -s ! 208.225.84.29 -d 0.0.0.0/0 80 -j REDIRECT 3128"
and also added the commands in the squid.conf file

httpd_accel_host virtual
httpd_accel_port 80
httpd_accel_with_proxy on
httpd_accel_uses_host_header on

then i went and added the route-map proxy-redirect info..
into our cisco 2620 router running IOS 12.0
so the cisco config looks like..

access-list 110 deny tcp any any neq www
access-list 110 deny tcp host 208.225.84.29 any
access-list 110 permit tcp any any
route-map proxy-redirect permit 10
 match ip address 110
 set ip next-hop 208.225.84.29

then when i enable the routemap with the command

interface Ethernet0
         ip policy route-map proxy-redirect

it accepts the command.. but then i take out the proxy info from
my browser and no luck.. it seems to resolve the IP..
but no traffic it doesnt download the page..
and if i remove that command for the ethernet0
it starts working again.. put in the proxy info into IE
and the proxy works again too..
does anyone have any ideas.. anything i can do or info to
troubleshoot?? any help would be appriciated..
thanks in advance
~Nick

        
 
Received on Wed May 03 2000 - 12:37:17 MDT

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:53:15 MST