Re: Maximum Resident Size

-- [ From: squid * EMC.Ver #2.5.02 ] --

Thanks to both.

I will try this weekend to do the options of Ahsan, but not the one of
Reuben. My knowledge on this matter is not very good like to make
modifications on the squid so when I build it, it enable "x" malloc library
or mem lib as Ahsan advice ...

Regards
Rolando
-------- REPLY, Original message follows --------

Date: Tuesday, 04-Apr-00 09:16 PM

From: Reuben Farrelly \ Internet: (reuben-squid@reub.net)
To: Ahsan Khan \ Internet: (ahsank@one.net.pk)
To: Squid \ Internet: (squid-users@ircache.net)
To: squid \ Internet: (squid@sigmanet.hn)

Subject: Re: Maximum Resident Size

Or better still, download a SRC rpm of squid, install it via rpm -ivh
<*src.rpm> and make some modifications of the squid.spec file so that it
will build with --enable-dlmalloc.

Then recompile, rpm -bb <spec file>

Incidentally you don't need to squid -z with the rpms. They're clever
enough to do it all for you :)

Reuben

At Tuesday 03:51 PM 4/04/2000 +0500, Ahsan Khan wrote:
>Ok the best thing is to get the squid tar.gz file form squid site.
>
>unpack it and then follow the step no 2 in my mail. use a different mem LIB
.
>Hope the problem will be resolved..
>
>
>With Regards
>Ahsan Khan
>Sr. System Admin
>Internet Division (OneNet)
>Sun Communication Pvt. Ltd.
>Pakistan
>http://www.one.net.pk
>
>
>----- Original Message -----
>From: "squid" <squid@sigmanet.hn>
>To: "Squid" <squid-users@ircache.net>
>Cc: "Ahsan Khan" <ahsank@one.net.pk>
>Sent: Tuesday, April 04, 2000 2:46 AM
>Subject: Re: Maximum Resident Size
>
>
> > -- [ From: squid * EMC.Ver #2.5.02 ] --
> >
> > Ahsan.
> >
> > Did none of the options you mention, just installed the Squid's rpm that
> > comes with RedHat software, and then just configured squid.conf and
>executed
> > squid -z.
> >
> > Thanks for your prompt reply.
> > Rolando
> >
> > -------- REPLY, Original message follows --------
> >
> > Date: Tuesday, 04-Apr-00 02:03 AM
> >
> > From: Ahsan Khan \ Internet: (ahsank@one.net.pk)
> > To: Squid \ Internet: (squid-users@ircache.net)
> > To: squid \ Internet: (squid@sigmanet.hn)
> >
> > Subject: Re: Maximum Resident Size
> >
> > well Henrick said that Your System Memory Library is not working
properly
>or
> > the external Memory Lib comes with squid did not supported on you system
,
> >
> > so for your help can you tell me that did you configure & compile squid
>like
> > this...
> >
> >
> >
> > ./configure --enable-dlmalloc make
> > make install
> >
> > or you just run
> >
> >
> > ./configure
> > make
> > make install
> >
> > if you have done the last option use the first one.. :-)))
> >
> > With Regards
> > Ahsan Khan
> > Sr. System Admin
> > Internet Division (OneNet)
> > Sun Communication Pvt. Ltd.
> > Pakistan
> > http://www.one.net.pk
> >
> >
> > ----- Original Message -----
> > From: "squid" <squid@sigmanet.hn>
> > To: "Squid" <squid-users@ircache.net>
> > Sent: Monday, April 03, 2000 9:54 PM
> > Subject: Re: Maximum Resident Size
> >
> >
> > > -- [ From: squid * EMC.Ver #2.5.02 ] --
> > >
> > > I have not been able to fix this error reported on the cachemgr:
> > > "Resource usage for squid:
> > > Maximum Resident Size: 0 KB"
> > >
> > > I have tested with RedHat6.1 and Squid2.2Stable4, and also with
>RedHat6.2
> > > and Squid2.3Stable1, on both installations I get the same error.
> > >
> > > I am testing on a PentiumII 350 with 256mb ram and 2 uwscsi one of 4.
5gb
> > for
> > > the system and another of 9.1 for Squid catched pages.
> > >
> > > I got an answer from Henrik Nordstrom about a month ago (please see
> > below),
> > > but with my little knowledge on this matter, it did not help me...
> > >
> > > Could someone advice on how to fix this ?
> > >
> > > Thanks
> > > Rolando
> > >
> > > -------- REPLY, Original message follows --------
> > >
> > > Date: Saturday, 04-Mar-00 10:19 AM
> > >
> > > From: Henrik Nordstrom \ Internet: (hno@hem.passagen.se)
> > > To: squid \ Internet: (squid@sigmanet.hn)
> > > cc: Squid \ Internet: (squid-users@ircache.net
)
> > >
> > > Subject: Re: Maximum Resident Size
> > >
> > > squid wrote:
> > > >
> > > > -- [ From: squid * EMC.Ver #2.5.02 ] --
> > > >
> > > > Sorry to bother again.
> > > >
> > > > Why I am getting this reading with the cachemgr on my Squid: Maximum
> > > > Resident Size: 0 KB ?
> > >
> > > Probably this variable is not supported on your platform or malloc
>library
> > .
> > >
> > > --
> > > Henrik Nordstrom
> > > Squid hacker
> > >
> > > -------- REPLY, End of original message --------
> > >
> > >
> >
> >
> > -------- REPLY, End of original message --------
> >
> >

-------------------------------------------------------------
Reuben Farrelly West Ryde, NSW 2114, Australia

-------- REPLY, End of original message --------
Received on Tue Apr 04 2000 - 13:42:44 MDT