On Wed, 2 Feb 100, Nikos Chrysos wrote:
> I have configured my cache_dir to occupy 950 Mbytes (the partition is
> a little bigger 1.1G)
>
> when the disk gets full (about 95-99%)!! occupying 1017Mbytes !!
> i see write errors on the cache log going like this:
>
> 28) No space left on device
> 2000/02/02 19:18:37| storeSwapOutFileOpened: Unable to open swapfile: /cache2/cache/02/21/000221F2
> (28) No space left on device
> 2000/02/02 19:18:37| storeSwapOutFileOpened: Unable to open swapfile: /cache2/cache/02/21/000221F3
> 000/02/02 20:13:09| Select loop Error. Retry 10
> FATAL: Select Loop failed!
> Squid Cache (Version 2.2.STABLE4): Terminated abnormally.
> CPU Usage: 1419.210 seconds
> Maximum Resident Size: 0 KB
> Page faults with physical i/o: 313783
> Memory usage for squid via mallinfo():
> total space in arena: 100928 KB
> Ordinary blocks: 97037 KB 3614 blks
> Small blocks: 0 KB 0 blks
> Holding blocks: 12636 KB 55 blks
> Free Small blocks: 0 KB
> Free Ordinary blocks: 3890 KB
> Total in use: 109673 KB 109%
> Total free: 3890 KB 4%
> 2000/02/02 20:13:09| storeDirWriteCleanLogs: Starting...
> 2000/02/02 20:13:09| storeDirWriteCleanLogs: /cache2/cache/swap.state.clean: (28) No space left on device !!!!!!!!!!!!!!!!!!!!!!!!!!
>
> "CANNOT RESTART...............??!(my comment)"
>
> 2000/02/02 20:13:09| Finished. Wrote 0 entries.
> 2000/02/02 20:13:09| Took 0 seconds ( 0.0 entries/sec).
> 2000/02/02 20:13:12| Starting Squid Cache version 2.2.STABL
>
> But never comes up again.....
> Is there something i am missing (there must be...:) )
> I told it to use 950 and it uses everything it finds (leading to it's destruction..!!!!!!!)
> I must say that the request rate is very big...(~80 req/sec...)
>
> Any help valuable
Try a number lower than 950 Mbytes!!!!!!!!
Start with 850, see if that works.
Received on Wed Feb 02 2000 - 12:45:16 MST
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:50:54 MST