RE: WCCP with 2.3Stable1 & Cisco

Hi Glenn,

I have just downloaded kernel 2.2.14, re-applied the patch to ip_gre.c,
re-compiled it...

On reboot, modprobe ip_gre
(no error)
did the iptunnel and the ifconfig command... (no error), and I get exactly
the same output..

What am I doing wrong?

Oh ya, by the way, I do see the packets coming in from the router with
tcpdump (gre-encap)

I have also verified that there is only 1 gre module loaded (I have only 1
:-)

Any pointers would be appreciated...

Walter

> -----Original Message-----
> From: Glenn Chisholm [mailto:glenn@ircache.net]
> Sent: Friday, January 28, 2000 11:32 PM
> To: Walter Klomp
> Cc: squid-users@ircache.net
> Subject: Re: WCCP with 2.3Stable1 & Cisco
>
>
> > I have followed the instructions for WCCP word for word.
> >
> > I am running Redhat Linux 6.1 with Glenn's GRE module. The
> redirection from
> > the router to the squid-box seems to be working, based on the
> packets coming
> > in... However there is no response from the squid box, and
> nothing is seen
> > on the browser... Telnetting to any remote site with port 80
> doesn't give me
> > a connection...
> >
> > gre1 Link encap:UNSPEC HWaddr
> > CB-7B-08-06-00-00-00-00-00-00-00-00-00-00-00-00
> > UP POINTOPOINT RUNNING NOARP MTU:1476 Metric:1
> > RX packets:293 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
>
> If you followed the instructions word for word then something is
> very wrong as the WCCP specific GRE module does not create a pseudo
> interface like gre1. So it sounds like you have loaded two GRE modules
> which will create all sorts of problems. Or you are confused as to which
> GRE module you have loaded.
>
> glenn
Received on Fri Jan 28 2000 - 11:23:25 MST