attached mail follows:
As a side note, this server has been running quite "stable" with about 5k
req/min for 2 days, but if the load increases above ~ 14 or 15k req/min, the
problem shows few minutes later.
P.D. If there is anything else I can do to help, just let me know, if you
want me to test a patch or a new HEAD version, just let me know, I can do it
immediately.
Greeting...
Ales
----- Original Message -----
From: "Henrik Nordstrom" <hno@hem.passagen.se>
To: "Alejandro A. Ramirez" <ales@megared.net.mx>
Sent: Wednesday, February 14, 2001 1:35 PM
Subject: Re: [SQU] Squid 2.4 Head FATAL: Received Segment Violation...dying
> You have already provided that. ("backtrace" and "stack trace" is the
> same thing, trace of the stack frames up to the failing point in the
> code).
>
> /Henrik
>
> Alejandro A. Ramirez wrote:
> >
> > How can I get a Stack Trace???
> >
> > Greetings...
> > Ales
> >
> > ----- Original Message -----
> > From: "Henrik Nordstrom" <hno@hem.passagen.se>
> > To: "Sonny Franslay" <sonnyfranslay@pacific.net.sg>
> > Cc: <squid-users@ircache.net>
> > Sent: Wednesday, February 14, 2001 3:06 AM
> > Subject: Re: [SQU] Squid 2.4 Head FATAL: Received Segment
Violation...dying
> >
> > > It would help a lot if you too could get a strack trace.
> > >
> > > Are you too using the diskd store?
> > >
> > > --
> > > Henrik Nordstrom
> > > Squid hacker
> > >
> > >
> > > Sonny Franslay wrote:
> > > >
> > > > Hi,
> > > >
> > > > I am also experiencing the same kind of problem with Squid2.4
> > > > Pre-Stable. However, this problem does not occur just after we run
> > > > squid but much later after that.
> > > >
> > > > What I notice however is that this Segment Violation error occurs
when
> > > > there are numerous Forwarding loop. This error is kinda weird as we
did
> > > > not used to have such warning with 2.4Dev4. Below is an extract for
such
> > > > error:
> > > >
> > > > ->2001/02/13 23:04:03| WARNING: Forwarding loop detected for:
> > > > ->GET
> > >
> >
> ->/scripts/cms/CmsInit.ASP?ID=1&D2=l?OACC@??????&AW=167&LV=2045&CU=5131279
> > 6
> > > > ->HTTP/1.0
> > > > ->User-Agent: Mozilla/4.01 [en] (WinNT; I)
> > > > ->Pragma: no-cache
> > > > ->Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*
> > > > ->Accept-Language: en
> > > > ->Accept-Charset: iso-8859-1,*,utf-8
> > > > ->Via: 1.0 proxy1.foo.com:8080 (Squid/2.4.PRE-STABLE), 1.0
> > > > ->proxy11.foo.com:8080 (Squid/2.4.PRE-STABLE
> > > > ->), 1.0 proxy2.foo.com:8080 (Squid/2.4.PRE-STABLE), 1.0
> > > > ->prpxy12.foo.com:8080 (Squid/2.4.PRE-STABLE)
> > > > ->X-Forwarded-For: 192.168.41.38, 192.168.41.43, 192.168.41.34
> > > > ->Host: proxy.foo.com:8080
> > > > ->Cache-Control: max-age=0
> > > > ->Connection: keep-alive
> > > >
> > > > then squid will die:
> > > >
> > > > ->FATAL: Received Segment Violation...dying.
> > > > ->2001/02/13 23:04:06| Not currently OK to rewrite swap log.
> > > > ->001/02/13 23:04:06| storeDirWriteCleanLogs: Operation aborted.
> > > >
> > > > Another thing I notice also is that such forwarding loop error only
with
> > > > WinNT client (not sure if it is true WinNT or Win2k).
> > > >
> > > > User-Agent: Mozilla/4.01 [en] (WinNT; I)
> > > >
> > > > Currently, one way to end the segmentation fault error is to stop
> > > > squid, remove all the swap.state file under squid/swap directory and
> > start
> > > > squid. This somehow helps but I am not very comfortable with such
> > measure.
> > > >
> > > > Have been losing sleep over this, I really hope someone can
enlighten me
> > > > on this.
> > > >
> > > > thanks in advance.
> > > >
> > > > Sonny I. Franslay
> > > > --------------------
> > > >
> > > > On Tue, 13 Feb 2001, Alejandro A. Ramirez wrote:
> > > >
> > > > > Hi Henrik,
> > > > >
> > > > > Im testing the squid-2.4-200102120000 version, and it seems
that I
> > have
> > > > > hitted a bug, below you will find the backtrace, Im using FreeBSD
4.2
> > with 2
> > > > > PIII 600 Mhz processors, and 1 Gig of Ram, it was serving 18.7
> > kreq/min with
> > > > > a very good performance, the configuration options are as follows:
> > > > >
> > > > > setenv PREFIX /usr/local
> > > > >
> > > > > ./configure --prefix=${PREFIX} \
> > > > > --with-layout=GNU \
> > > > > --bindir=${PREFIX}/sbin \
> > > > > --sysconfdir=${PREFIX}/etc/squid \
> > > > > --localstatedir=${PREFIX}/squid \
> > > > > --enable-snmp \
> > > > > --disable-ident-lookups \
> > > > > --enable-underscores \
> > > > > --disable-icp \
> > > > > --enable-truncate \
> > > > > --enable-storeio=ufs,diskd
> > > > >
> > > > > And in the squid.conf I have all the cache_dirīs like this one :
> > > > >
> > > > > cache_dir diskd -1 /cache0/0 6000 16 256 64 72
> > > > >
> > > > > The kernel is compiled with the following options:
> > > > >
> > > > > options NMBCLUSTERS=32768 #Support for 32M for MBufs
> > > > > options MAXDSIZ="(1024*1024*1024)"
> > > > > options DFLDSIZ="(1024*1024*1024)"
> > > > > options PQ_LARGECACHE
> > > > > options SYSVMSG
> > > > > options MAXFILES=32768
> > > > > options MSGMNB=16384
> > > > > options MSGMNI=41
> > > > > options MSGSEG=2049
> > > > > options MSGSSZ=64
> > > > > options MSGTQL=1024
> > > > > options SYSVSHM
> > > > > options SHMSEG=16
> > > > > options SHMMNI=32
> > > > > options SHMMAX=2097152
> > > > > options SHMALL=8192
> > > > >
> > > > > The system log file it showed this:
> > > > >
> > > > > Feb 13 12:35:22 cache /kernel: pid 214 (squid), uid 80: exited on
> > signal 11
> > > > >
> > > > > cache# netstat -mb
> > > > > 68/16352/131072 mbufs in use (current/peak/max):
> > > > > 66 mbufs allocated to data
> > > > > 2 mbufs allocated to packet headers
> > > > > 64/5632/32768 mbuf clusters in use (current/peak/max)
> > > > > 15352 Kbytes allocated to network (15% of mb_map in use)
> > > > > 0 requests for memory denied
> > > > > 0 requests for memory delayed
> > > > > 0 calls to protocol drain routines
> > > > >
> > > > > cache# df
> > > > > Filesystem 1K-blocks Used Avail Capacity Mounted on
> > > > > /dev/idad0s1a 254063 43537 190201 19% /
> > > > > /dev/idad0s1h 60521954 619863 55060335 1% /cache0
> > > > > /dev/da0s1e 17235871 577908 15279094 4% /cache1/0
> > > > > /dev/da1s1e 17235871 567513 15289489 4% /cache1/1
> > > > > /dev/da2s1e 17235871 629858 15227144 4% /cache1/2
> > > > > /dev/da3s1e 17235871 619487 15237515 4% /cache1/3
> > > > > /dev/da4s1e 17235871 586776 15270226 4% /cache1/4
> > > > > /dev/da5s1e 17235871 577241 15279761 4% /cache1/5
> > > > > /dev/idad0s1e 1016303 11 934988 0% /tmp
> > > > > /dev/idad0s1g 4065262 544458 3195584 15% /usr
> > > > > /dev/idad0s1f 2032623 599 1869415 0% /var
> > > > > procfs 4 4 0 100% /proc
> > > > >
> > > > > The filesystems are mounted with softupdates & noatime option.
> > > > >
> > > > > Here are the first two errors that I got before I used GDB for
getting
> > a
> > > > > backtrace:
> > > > >
> > > > > 2001/02/13 11:26:33| clientReadRequest: FD 672 Invalid Request
> > > > > 2001/02/13 11:26:33| clientSendMoreData: Deferring
> > error:invalid-request
> > > > > FATAL: Received Segment Violation...dying.
> > > > > 2001/02/13 11:26:38| storeDirWriteCleanLogs: Starting...
> > > > > 2001/02/13 11:26:38| WARNING: Closing open FD 22
> > > > > 2001/02/13 11:26:38| 65536 entries written so far.
> > > > > 2001/02/13 11:26:38| 131072 entries written so far.
> > > > > 2001/02/13 11:26:38| Finished. Wrote 156863 entries.
> > > > > 2001/02/13 11:26:38| Took 0.5 seconds (325129.6 entries/sec).
> > > > > CPU Usage: 2526.218 seconds = 1370.164 user + 1156.054 sys
> > > > > Maximum Resident Size: 245556 KB
> > > > > Page faults with physical i/o: 0
> > > > >
> > > > > 2001/02/13 11:30:34| clientReadRequest: FD 4339 Invalid Request
> > > > > 2001/02/13 11:30:34| clientSendMoreData: Deferring
> > error:invalid-request
> > > > > FATAL: Received Bus Error...dying.
> > > > > 2001/02/13 11:30:36| storeDirWriteCleanLogs: Starting...
> > > > > 2001/02/13 11:30:36| WARNING: Closing open FD 28
> > > > > 2001/02/13 11:30:36| 65536 entries written so far.
> > > > > 2001/02/13 11:30:36| 131072 entries written so far.
> > > > > 2001/02/13 11:30:36| Finished. Wrote 168271 entries.
> > > > > 2001/02/13 11:30:36| Took 0.4 seconds (384771.6 entries/sec).
> > > > > CPU Usage: 183.611 seconds = 97.945 user + 85.666 sys
> > > > > Maximum Resident Size: 154836 KB
> > > > > Page faults with physical i/o: 2
> > > > >
> > > > > Here it is the GDB Backtrace:
> > > > >
> > > > > Script started on Tue Feb 13 12:01:17 2001
> > > > > GNU gdb 4.18
> > > > > Copyright 1998 Free Software Foundation, Inc.
> > > > > GDB is free software, covered by the GNU General Public License,
and
> > you are
> > > > > welcome to change it and/or distribute copies of it under certain
> > > > > conditions.
> > > > > Type "show copying" to see the conditions.
> > > > > There is absolutely no warranty for GDB. Type "show warranty" for
> > details.
> > > > > This GDB was configured as "i386-unknown-freebsd"...
> > > > > (gdb) handle SIGPIPE noprint nostop passhandle SIGPIPE noprint
nostop
> > pass
> > > > > Signal Stop Print Pass to program Description
> > > > > SIGPIPE No No Yes Broken pipe
> > > > > (gdb) r -CNd1r -CNd1
> > > > > Starting program: /usr/local/sbin/squid -CNd1
> > > > > 2001/02/13 12:01:28| Starting Squid Cache version 2.4.PRE-STABLE
for
> > > > > i386-unknown-freebsd4.2...
> > > > > 2001/02/13 12:01:28| Process ID 214
> > > > > 2001/02/13 12:01:28| With 32768 file descriptors available
> > > > > 2001/02/13 12:01:28| Performing DNS Tests...
> > > > > 2001/02/13 12:01:28| Successful DNS name lookup tests...
> > > > > 2001/02/13 12:01:28| DNS Socket created on FD 7
> > > > > 2001/02/13 12:01:28| Adding nameserver 127.0.0.1 from
/etc/resolv.conf
> > > > > 2001/02/13 12:01:28| Unlinkd pipe opened on FD 12
> > > > > 2001/02/13 12:01:28| Swap maxSize 43008000 KB, estimated 3308307
> > objects
> > > > > 2001/02/13 12:01:28| Target number of buckets: 165415
> > > > > 2001/02/13 12:01:28| Using 262144 Store buckets
> > > > > 2001/02/13 12:01:28| Max Mem size: 131072 KB
> > > > > 2001/02/13 12:01:28| Max Swap size: 43008000 KB
> > > > > 2001/02/13 12:01:28| Store logging disabled
> > > > > 2001/02/13 12:01:28| Rebuilding storage in /cache0/0 (DIRTY)
> > > > > 2001/02/13 12:01:28| Rebuilding storage in /cache1/0/0 (DIRTY)
> > > > > 2001/02/13 12:01:28| Rebuilding storage in /cache1/1/0 (DIRTY)
> > > > > 2001/02/13 12:01:28| Rebuilding storage in /cache1/2/0 (DIRTY)
> > > > > 2001/02/13 12:01:28| Rebuilding storage in /cache1/3/0 (DIRTY)
> > > > > 2001/02/13 12:01:28| Rebuilding storage in /cache1/4/0 (DIRTY)
> > > > > 2001/02/13 12:01:28| Rebuilding storage in /cache1/5/0 (DIRTY)
> > > > > 2001/02/13 12:01:28| Using Round Robin store dir selection
> > > > > 2001/02/13 12:01:28| Set Current Directory to /cache0/0
> > > > > 2001/02/13 12:01:28| Loaded Icons.
> > > > > 2001/02/13 12:01:28| Accepting HTTP connections at 0.0.0.0, port
80,
> > FD 31.
> > > > > 2001/02/13 12:01:28| Accepting SNMP messages on port 1610, FD 33.
> > > > > 2001/02/13 12:01:28| Accepting WCCP messages on port 2048, FD 34.
> > > > > 2001/02/13 12:01:28| Ready to serve requests.
> > > > > 2001/02/13 12:01:30| Store rebuilding is 17.0% complete
> > > > > 2001/02/13 12:01:37| Done reading /cache1/1/0 swaplog (24037
entries)
> > > > > 2001/02/13 12:01:37| Done reading /cache1/0/0 swaplog (24078
entries)
> > > > > 2001/02/13 12:01:37| Done reading /cache1/2/0 swaplog (24075
entries)
> > > > > 2001/02/13 12:01:37| Done reading /cache1/3/0 swaplog (24077
entries)
> > > > > 2001/02/13 12:01:37| Done reading /cache1/5/0 swaplog (24077
entries)
> > > > > 2001/02/13 12:01:37| Done reading /cache0/0 swaplog (24114
entries)
> > > > > 2001/02/13 12:01:37| Done reading /cache1/4/0 swaplog (24142
entries)
> > > > > 2001/02/13 12:01:37| Finished rebuilding storage from disk.
> > > > > 2001/02/13 12:01:37| 168360 Entries scanned
> > > > > 2001/02/13 12:01:37| 0 Invalid entries.
> > > > > 2001/02/13 12:01:37| 0 With invalid flags.
> > > > > 2001/02/13 12:01:37| 168117 Objects loaded.
> > > > > 2001/02/13 12:01:37| 0 Objects expired.
> > > > > 2001/02/13 12:01:37| 240 Objects cancelled.
> > > > > 2001/02/13 12:01:37| 4 Duplicate URLs purged.
> > > > > 2001/02/13 12:01:37| 2 Swapfile clashes avoided.
> > > > > 2001/02/13 12:01:37| Took 8.4 seconds (19971.4 objects/sec).
> > > > > 2001/02/13 12:01:37| Beginning Validation Procedure
> > > > > 2001/02/13 12:01:37| Completed Validation Procedure
> > > > > 2001/02/13 12:01:37| Validated 168114 Entries
> > > > > 2001/02/13 12:01:37| store_swap_size = 1619718k
> > > > > 2001/02/13 12:01:37| storeLateRelease: released 0 objects
> > > > > 2001/02/13 12:01:48| parseHttpRequest: Unsupported method 'HA'
> > > > > 2001/02/13 12:01:48| clientReadRequest: FD 150 Invalid Request
> > > > > 2001/02/13 12:01:58| parseHttpRequest: Requestheader contains NULL
> > > > > characters
> > > > > ...
> > > > > ...
> > > > > ...
> > > > > 2001/02/13 12:27:54| parseHttpRequest: Requestheader contains NULL
> > > > > characters
> > > > > 2001/02/13 12:27:54| clientReadRequest: FD 794 Invalid Request
> > > > > 2001/02/13 12:27:54| clientSendMoreData: Deferring
> > error:invalid-request
> > > > >
> > > > > Program received signal SIGSEGV, Segmentation fault.
> > > > > 0x80aa847 in linklistPush (L=0x132843, p=0x50137000) at
tools.c:873
> > > > > 873 while (*L)
> > > > > (gdb) bt
> > > > > #0 0x80aa847 in linklistPush (L=0x132843, p=0x50137000) at
> > tools.c:873
> > > > > #1 0x80b7a20 in storeDiskdShmPut (sd=0x820d948, offset=192512) at
> > > > > store_dir_diskd.c:1643
> > > > > #2 0x80b482c in storeDiskdDirCallback (SD=0x820d948) at
> > > > > store_dir_diskd.c:532
> > > > > #3 0x80a6ac3 in storeDirCallback () at store_dir.c:463
> > > > > #4 0x8065f0a in comm_poll (msec=0) at comm_select.c:330
> > > > > #5 0x80882ed in main (argc=2, argv=0xbfbffc24) at main.c:720
> > > > > #6 0x804a529 in _start ()
> > > > > (gdb) c
> > > > > Continuing.
> > > > >
> > > > > Program terminated with signal SIGSEGV, Segmentation fault.
> > > > > The program no longer exists.
> > > > > Script done on Tue Feb 13 12:35:41 2001
> > > > >
> > > > > I Hope this can help you to debug this, if there is anything else
that
> > I can
> > > > > do to help, just let me know.
> > > > >
> > > > > Greetings
> > > > > Ales
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
> > > > >
> > >
> > > --
> > > To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
Received on Thu Feb 15 2001 - 16:39:18 MST
This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:13:31 MST